ME2120 - 001
Overview
Ryan C. Cooper uses the simple pendulum project to compare linear small-angle and nonlinear models, extending the comparison from period and motion to Cartesian position, energy, and cable tension. The key modeling lesson is that pairing linearized motion with exact gravitational potential energy can produce apparent changes in total energy, while the linear model often gives a conservative force estimate that is useful for engineering design.
Key takeaways
- For a pendulum of length L, angular displacement converts to path distance as s = Lθ, while Cartesian coordinates use sine and cosine to reveal the actual swing envelope.
- With the bottom of the swing chosen as zero potential, gravitational energy is m g L(1 − cos θ), and tangential kinetic energy is based on speed Lθ̇.
- A linearized pendulum behaves mathematically like a spring, but its quadratic potential does not match the exact cosine-shaped gravitational potential at larger angles.
- Apparent energy variation can result from mixing linearized motion equations with exact nonlinear potential energy, rather than from physical energy loss in an ideal frictionless pendulum.
- Pendulum cable tension includes both the radial component of weight and centripetal demand: T = mg cos θ + mLθ̇².
- Linearized models can often overestimate force and support conservative preliminary designs, but engineers should verify that assumption for the specific system and quantify differences from nonlinear results.
Chapters
- Cooper frames the class around finishing Project 3 and deciding how small an angle must be for an acceptable error.
- Compare linear and nonlinear pendulum behavior using measurable quantities such as amplitude and time period.
- A 5.75-foot pendulum provides a reference for measuring and reporting differences in period.
- The angular motion can be converted into distance along the pendulum's path using arc length, s = Lθ.
- Arc length describes travel along the curved path, but clock or swing design may require knowing the horizontal space the motion occupies.
- The pendulum model assumes a point mass attached to a rigid-length connection.
- Sine and cosine convert the pendulum's angular position into Cartesian x-y coordinates.
- For a 5.75-foot pendulum swinging at an initial angle of 60 degrees, the horizontal position varies by several feet.
- Cartesian position makes the physical swing envelope easier to interpret than angle alone.
- Tangential speed is Lθ̇, so kinetic energy can be calculated from the already-computed angular velocity.
- Gravitational potential energy is mgh; choosing the bottom of the swing as zero gives height h = L(1 − cos θ).
- Cooper uses a one-pound weight, converted to mass in slugs by dividing by 32.2, for energy plots in foot-pounds.
- In an ideal pendulum with no friction or external work, kinetic plus potential energy should remain constant.
- The plotted linear and nonlinear models show different total-energy behavior, prompting the class to investigate the modeling assumptions.
- The difference is tied to comparing linearized pendulum motion with potential energy calculated using the exact cosine expression.
- Reducing the initial angle to 10 degrees sharply lowers the pendulum's energy scale, while the energy-curve shape remains similar.
- The approximation sin θ ≈ θ turns the pendulum equation into a spring-like linear equation, with the frequency term governed by g/L.
- The exact gravitational potential follows a cosine curve, whereas the linear spring model uses a quadratic potential, so their mismatch grows with angle.
- Radial force balance gives tension as T = mg cos θ + mLθ̇² for the pendulum's constrained circular path.
- Tension must support the radial component of weight and provide the centripetal acceleration needed to maintain the arc.
- Comparisons at smaller angles show only a small tension difference between the linear and nonlinear solutions.
- At a 90-degree initial angle, the linear and nonlinear models show a more noticeable difference in motion amplitude and peak tension.
- The plotted peak cable load is about 6.9 pounds in one comparison, while the larger-angle design example contrasts roughly 7 pounds with 8.1 pounds.
- The nonlinear equations are more physically exact, but linearized solutions often overestimate forces and can provide a conservative preliminary design estimate.
- Cooper asks students to support claims with a specific graph and a numerical difference rather than saying only that curves differ.
- For the 90-degree case, the example amplitude is about 5.1 for the nonlinear result versus roughly 6 to 6.5 for the linear result.
- Students should identify the chosen error measure, such as amplitude or period, and state its magnitude.
- The following Monday is reserved for transition to Module 4 and independent reading.
- The class plans to meet Wednesday to begin Case Problem 4; Friday may become an independent work session because Cooper will travel.
- The tentative plan is to verify and submit Case Problem 4 the following Monday, adjusting if more time is needed.
Transcript excerpt
1:16 Okay, welcome back. goal for today is wrap up uh project number three. Um last time we left off we were talking about like what is a small angle approximation? How small is small enough? Um hopefully you came up with some number for yourself of like what is acceptable error for that small angle approximation. That's a good thing to talk about in like um like when you're talking about the biggest difference like as the angles are getting bigger, you're seeing bigger differences in amplitude, time period, uh like all those things that are describing the
2:04 motion of this pendulum swinging back and forth. Um you can talk about how it's dependent on how big that angle is. Um then quantifying the error that's kind of that's what we had done with like time period where in uh on Monday earlier this week we measured what is the time period of a 5 and 3/4 foot pendulum and then then we can predict that we can figure out like okay well this is what it would swing like and measure what that time period is. So one way of quantifying it is looking at time periods and the difference there that is error. So you can report that. Um so last thing that we're kind of that we left off from Wednesday was what other
2:54 calculations we could do. So, what else? What else can we do now that we have we know? Oh, and right now we're at 180 degree initial angle. So, let's put that back to something like we'll go back to 60°. That one's a nice halfway, right? We see a difference, but it doesn't get too large over time. So, we have all this information. We know what the pendulum's doing, how fast
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Professor Ryan C. Cooper.