ME2120 - 001
Overview
Ryan C. Cooper introduces a yo-yo de-spinning mechanism, which transfers a spacecraft’s angular momentum to tethered masses that are released once the payload stops rotating. Using a roughly 1,200 kg Tesla Roadster as a cuboid example, he explores moment of inertia and simulation results: 100 g yo-yos need about 9.6 m of cord to stop the payload, whether it initially spins at 15 or 150 rad/s, though the stopping time changes.
Key takeaways
- A yo-yo de-spinner transfers a rotating payload’s angular momentum into tethered masses, then releases those masses when the payload reaches its target rotation rate.
- For Cooper’s 1,200 kg Roadster example, 10 g yo-yos require about 17.2 m of cord at 15 rad/s, while 100 g yo-yos reduce the requirement to about 9.6 m.
- With 100 g yo-yos, increasing the payload’s initial spin from 15 to 150 rad/s reduces stopping time from about 0.3 to 0.03 seconds but leaves the required cord length near 9.6 m.
- A yo-yo mass initially shares the payload’s rotation; treating it as stationary at release would misrepresent the system’s initial angular momentum.
- An overlong tether can reverse the payload’s rotation because tension continues applying torque after the payload passes through zero angular velocity.
- Moment of inertia depends on the selected rotation axis and has units of kg·m²; the m⁴ unit belongs to the second moment of area used in beam mechanics.
Chapters
- NanoHUB was unavailable for scheduled maintenance, so Cooper postponed hands-on work with Jupyter and the course resources until Friday.
- Project 4’s deadline moved from the next day to Tuesday, giving students an additional week to work.
- The final week will focus on students’ Project 5 goals, including choosing an application and producing a portfolio-ready engineering artifact.
- A spinning upper stage can release tethered masses that unwind from the spacecraft and absorb its angular momentum.
- When the tether reaches its designed length, the remaining rotation is canceled and the masses are released to fly away.
- Cooper uses an animation and spacecraft footage to illustrate how the mechanism reduces spin without necessarily requiring a large mass.
- The example payload is a Tesla Roadster, approximated as a cuboid rather than modeled with detailed CAD geometry.
- A cuboid approximation is a useful starting point even if its moment of inertia differs from a more detailed model by roughly 30%.
- Students can choose another payload, estimate its mass and dimensions, select a rotation axis, and calculate its moment of inertia.
- Mass moment of inertia is measured in kg·m², unlike the second moment of area used in beam mechanics, which is measured in m⁴.
- For a cuboid, the relevant dimensions in the inertia formula depend on the chosen axis through the center of mass.
- The axis matters physically: spinning around the vehicle’s length differs from tumbling or corkscrewing around another axis.
- Cooper’s example uses a 1,200 kg car, 10 g yo-yo masses, and an initial payload rotation of 15 rad/s.
- The simulation setup depends on the payload inertia, yo-yo mass, and initial angular velocity.
- Students will adapt the provided setup for their own payloads and run the model during the later hands-on session.
- The yo-yos initially rotate with the payload; once released, tether tension transfers angular momentum from the payload to the masses.
- At 15 rad/s, the 10 g example reaches its stopping point after about 0.6 seconds.
- The corresponding cord length is approximately 17.2 m, or a little over 50 feet, and the simulation treats the cord as massless and flexible.
- Cooper asks students to predict how stopping time and cord length change when yo-yo mass increases.
- Raising each yo-yo from 10 g to 100 g reduces the stopping time to about 0.3 seconds.
- The required cord length also falls, from 17.2 m to about 9.6 m, because the heavier masses can carry more angular momentum.
- The class tests a tenfold increase in initial spin rate, from 15 to 150 rad/s, while keeping yo-yo mass at 100 g.
- The required cord length remains about 9.6 m, while stopping time falls from roughly 0.3 seconds to 0.03 seconds.
- A tether that is too long can carry the payload past zero rotation and make it spin backward, so extra cord is not automatically safer.
- Tether tension continues applying torque to the payload as the yo-yos move outward, even after the payload reaches zero angular velocity.
- If the tether remains attached too long, that continuing torque accelerates the payload in the opposite rotational direction.
- The simulation assumes the yo-yos keep moving outward rather than rewinding or re-spooling.
- Cooper leaves students with the question of whether external torque acts on the combined car-and-yo-yo system.
- The next analysis should track total angular momentum as the system changes shape and the yo-yos move away from the payload.
- The planned Friday session will use Python and the course’s computational resources to run the model.
Transcript excerpt
0:41 Okay, welcome back. As I was getting set up for today, I tried to log into our NanoHub. And I forgot that there's like 24 hours of maintenance that started today. So, just that's how this week is going, I guess. So, here we go. Um so, today instead of like I'll go I'll take you like on a tour of like what we're trying to do, and then next class we'll have access to So, Friday we'll have access to Jupiter and these these resources back on NanoHub. And that's when we can like troubleshoot and kind of build something. Um so,
1:29 today we'll walk through the background and kind of information that we need, and then Friday we'll do like actual hands-on how do we get it into a notebook. Yeah. Let's push off. Yeah, so we have extra time. I forget what day Yeah, tomorrow's not going to work. Um so, let's get back in here to And while we're at it, let's go through course logistics, cuz it helps to check in, right? Figure out what we're doing. Why we're doing it. Always nice. So, we're here in module four. Um we were supposed to turn in project four tomorrow. We're not going to do that.
2:17 So, let's push this off. Yeah, no way, man. We don't even have computational tools. So, we'll we'll throw this back to Tuesday. Um so, it gives us another work another week to work on it. At least like the official deadline. Um and next week is our last week of class. Is that right? Feels doesn't feel right, but um Yeah, the year's are short and the days are long, right? The semester's short, but the days are long. So, next week when we get back, goal is
3:07 kind of revisiting what the
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Professor Ryan C. Cooper.