MAT 291: Lecture 22 - Surface Flux Integrals of Vector Fields
Overview
Parinaz Naseri develops surface flux as the integral of a vector field's normal component, then shows how to compute it using parameterized surfaces, coordinate-system surface elements, and implicit surface equations. Worked examples produce fluxes of 4π for a radial field across a sphere, −8 through a tetrahedron's slanted face, and 6π across a closed cylinder for F = ⟨x, y, z⟩.
Key takeaways
- Surface flux is the integral of F · n̂ over a surface, so only the field component perpendicular to each surface element contributes.
- For a parameterized surface r(u,v), the oriented area element is (rᵤ × rᵥ) du dv; reversing the cross-product order reverses the orientation and flux sign.
- The radial field F = r/|r|³ has flux 4π through any centered sphere of radius a because the inverse-square field strength cancels the sphere’s a² area factor.
- For F = −x̂ across the first-octant plane x + y + z = 4, the projected triangular bounds are 0 ≤ y ≤ 4 and 0 ≤ x ≤ 4 − y, yielding flux −8.
- For F = ⟨x,y,z⟩ on the closed cylinder of radius 1 from z = 0 to z = 2, the side contributes 4π, the top 2π, and the bottom 0, for a total of 6π.
Chapters
- Flux through a surface depends on the part of the vector field normal to the surface; the tangential component contributes nothing.
- The local flux element is F · n̂ dS, with n̂ a unit normal and dS the surface-area element.
- Flux is built as a Riemann sum of small surface elements and then expressed as an integral.
- A general surface is parameterized by r(u,v) = ⟨x(u,v), y(u,v), z(u,v)⟩.
- The partial derivatives rᵤ and rᵥ are tangent to the surface, so rᵤ × rᵥ supplies a normal vector.
- The oriented area element is n̂ dS = (rᵤ × rᵥ) du dv, which also accounts for the area of a possibly non-rectangular parameter patch.
- For F = r/|r|³ on a sphere of radius a centered at the origin, the outward normal is r̂.
- On the sphere, |r| = a and dS = a² sin φ dφ dθ, with 0 ≤ φ ≤ π and 0 ≤ θ ≤ 2π.
- The radius factors cancel in F · r̂ dS, leaving an integral of sin φ over the full angular bounds and a total flux of 4π.
- Naseri connects this radial field to the electric field of a point charge and previews the role of flux in Gauss’s law.
- For an implicit surface h(x,y,z) = c, the gradient ∇h is normal to the surface.
- When a surface can be written as z = g(x,y), the oriented area vector is ⟨−gₓ, −gᵧ, 1⟩ dx dy for the upward orientation.
- The implicit-surface formula relates ∇h to the area element through the z derivative, with the orientation determining its sign.
- The example uses the constant field F = −x̂ and the plane z = 4 − x − y, the slanted face of a tetrahedron in the first octant.
- Writing the plane as x + y + z = 4 gives an area vector proportional to ⟨1,1,1⟩ dx dy.
- Projection onto the xy-plane gives 0 ≤ y ≤ 4 and 0 ≤ x ≤ 4 − y.
- Integrating F · n̂ dS over that triangular projection gives −8.
- With the outward normal convention, positive flux represents net flow leaving a closed surface and negative flux represents net flow entering it.
- The tetrahedron’s −8 result indicates inward flow through its slanted face relative to the chosen normal.
- Reversing n̂ reverses the sign of the flux, so orientation must be specified, especially for open surfaces.
- The closed cylinder is defined by x² + y² ≤ 1, with caps at z = 0 and z = 2.
- Its boundary is divided into the side, top, and bottom, whose outward normals differ.
- For the field F(x,y,z) = ⟨x,y,z⟩, total flux is computed by integrating over each piece and adding the results.
- The side is parameterized by r(θ,z) = ⟨cos θ, sin θ, z⟩ for 0 ≤ θ ≤ 2π and 0 ≤ z ≤ 2.
- The cross product rᵤ × rᵥ gives the outward area vector ⟨cos θ, sin θ, 0⟩ dθ dz, equivalent to r̂ dθ dz at radius 1.
- Substituting F = ⟨cos θ, sin θ, z⟩ makes the dot product equal to cos² θ + sin² θ = 1.
- Integrating over the full angle and height gives side flux 4π.
- The top cap at z = 2 has outward normal ẑ and cylindrical area element r dr dθ; its flux is 2π.
- The bottom cap at z = 0 has outward normal −ẑ, but F has zero z component there, so its flux is 0.
- Adding side, top, and bottom contributions gives total outward flux 4π + 2π + 0 = 6π.
Transcript excerpt
0:01 Okay, so the last topic we covered was kind of on surfaces too, but then we were looking at scalar functions. Today we are going to move on to uh vector functions or vector fields. Okay, we want to see how vector fields behave on a surface. Okay, on a curve previously you've seen that vector fields behave either by circulating on the curve or fluxing out of it. Right? So it's the same thing. It's the same thing when we talk about the behavior of a vector field through a
0:49 surface as well. on a surface [clears throat] a vector field can circulate or flux out as well. So the first one that we are going to look at is how does uh a vector field flux out of a surface which means if you extend it from the curve concept we looked at was like how much the field behave as a source or as a sync within that surface. Do you remember any of this? Okay. So anyway, we're going to refresh your mind on it as we go through this
1:36 lecture. Okay. So the when we talk about flux across a surface, okay, and we are dealing with a vector field which means that it has an amplitude and it has a direction. Okay, we are only interested in the direction of the field that is normal to the surface. That's the one that contributes to the flux through the surface. Okay, that's why in order to calculate the flux when we are integrating over the surface, ds here is a surface element. We are going to normalize. We are going to project and look at only part of the
2:26 vector field f that is normal to the surface by the dotproduct of that vector field and the n hat.
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.