MAT291: Lecture 29 - Dirac Delta Function
Overview
Parinaz Naseri explains the Dirac delta as a distribution used to represent point, line, and surface sources in electromagnetism, with its integral sampling a function at the source location. The lecture applies delta functions in Cartesian, cylindrical, and spherical coordinates to calculate charge and current, emphasizing normalization, units, shifted coordinates, and agreement between coordinate-system integrals.
Key takeaways
- The Dirac delta is normalized so that integrating δ(x − x′) over a range containing x′ gives 1, while integrating f(x)δ(x − x′) returns f(x′).
- A one-dimensional delta has units of 1/m, so Qδ(x)δ(y)δ(z) has the required volume charge density units of C/m³.
- With Naseri's even full-line convention, ∫₀∞δ(r)dr = 1/2; the spherical point-charge density Qδ(r)/(2πr²) accounts for that half-line normalization.
- Localized source formulas must encode both the source's geometry and position: for example, an offset cylinder centered on (−1, 1.4) uses r = √((x + 1)² + (y − 1.4)²) inside δ(r − R).
- Integrating σδ(r − R) over a cylindrical volume element r dr dθ dz produces Q = 2πRZσ, confirming that σ multiplies the cylinder's lateral area.
- For a circumferential shell current crossing a constant-θ half-plane, I = ∫J·dS gives I = JₛS because the surface normal is θ-hat and the radial delta integrates to 1 when the bounds include R.
Chapters
- Naseri introduces the Dirac delta as a tool associated with quantum mechanics and useful in physics.
- Charge density types include volume density ρ, surface density σ, line density λ, and point charge Q.
- Current densities include volume, surface, and filament forms; the lecture focuses on using delta functions to locate surface and filament sources.
- The delta function is presented as the limit of a normalized Gaussian, 1/(a√π) exp(−(x/a)²), as a approaches zero.
- As the Gaussian narrows, its height grows, producing a spike at x = 0 while its total integral remains 1.
- The delta is useful primarily inside integrals, where its normalized spike represents a localized source.
- The integral of δ(x) over any interval containing zero is 1; if the interval excludes zero, the result is 0.
- The shifted delta δ(x − x′) is zero except at x = x′.
- Integrating f(x)δ(x − x′) over a range containing x′ returns f(x′), the delta function's sampling or sifting property.
- Naseri represents δ(x) graphically as a spike at the origin and adopts an even, full-line definition.
- Under this convention, integrating δ(r) from 0 to infinity gives 1/2, which matters because radial coordinates satisfy r ≥ 0.
- For a shell at positive radius R, integrating f(r)δ(r − R) over a range containing R returns f(R), such as R for f(r) = r.
- A point charge at the origin is localized by δ(x)δ(y)δ(z), or by a radial delta in spherical coordinates.
- A line charge along the z-axis is localized with δ(x)δ(y), while a plane at z = 0 uses δ(z).
- A cylindrical shell of radius R uses δ(r − R), and a spherical shell uses the corresponding radial delta to select its radius.
- Since ∫δ(x)dx = 1 and dx has units of meters, a one-dimensional delta has units of 1/m.
- The Cartesian point-source expression Qδ(x)δ(y)δ(z) has units of C/m³, matching volume charge density ρ.
- Naseri emphasizes checking units when converting source descriptions between Cartesian, cylindrical, and spherical coordinates.
- For a point charge Q at (2, 0, 0), the Cartesian density is Qδ(x − 2)δ(y)δ(z), and integrating over all space returns Q.
- After shifting the origin to the charge, the spherical representation is Qδ(r)/(2πr²), with the radial half-line integral contributing 1/2.
- The spherical volume element r² sinθ dr dθ dφ cancels the r² factor, and the angular integrals yield 4π, recovering total charge Q.
- For a charge at (x′, y′, z′), the shifted radius is the distance from that point, and the radial representation retains units of C/m³.
- For a cylindrical shell whose axis is shifted to (−1, 1.4), the radial distance is r = √((x + 1)² + (y − 1.4)²).
- The shell's volume charge density is represented by σδ(r − R), which is nonzero only at the shell radius R.
- Integrating over height Z, angle 0 to 2π, and radius 0 to infinity gives Q = 2πRZσ, the surface density times the cylinder's lateral area.
- A filament current I along the z-axis is localized in cylindrical coordinates with a radial delta and points in the z-hat direction.
- A cylindrical surface current uses δ(r − R); changing from z-hat to θ-hat changes the current direction without changing the shell's location.
- A current sheet at z = 0 can be represented with δ(z) and a specified direction such as x-hat.
- Naseri distinguishes current from a point charge: current is the movement of charge along a path and requires a line or closed circuit.
- For a cylindrical shell with J = Jₛδ(r − R)θ-hat, the current through a constant-θ half-plane is found from I = ∫J·dS.
- In cylindrical coordinates, the half-plane element is dr dz and its normal is θ-hat, so the dot product selects the circumferential current.
- For z from 0 to S and r from 0 to 2R, the radial delta integral is 1, giving I = JₛS.
- Because I is in amperes and S is in meters, Jₛ has units A/m; the radial integral is zero if its bounds stop before the shell radius R.
Transcript excerpt
0:02 Good morning everyone. Okay. So today we're going to cover what um a specific type of function which is called durac delta function. [snorts] It was uh introduced by Mr. Durac in 1930s um as a tool for quantum mechanics actually but later they found it's actually more than a function. It's um a very useful tool in physics. So the reason we are going to use this direct delta function is because we want to describe different sources that you're going to see again in EC221 uh mathematically. Okay, we want to
0:54 describe their positions specifically in space using this direct um delta function. So for example, so far you've uh heard me talking about electric charges, electric charge densities and surface um or currents, volume currents, surface currents or what we call filament currents. Okay. In fact, uh we have four types of charge densities that the first one we call the volutric one. It's row. The next one is surface charge density. We usually show it by sigma. It has a
1:44 unit of column per meter squared. We also have a line charge density which we usually show with lambda and the unit is kum per meter. The point charge density is literally a point charge a charge of Q with with the unit of kum. Okay, we are going to see well this is pretty intuitive why the volume charge density is unit can be kum per meter uh cubed because later when you do integral of you know this row dv which you saw we we were using last
2:32 session when we were calculating the total charges that were infl closed in a surface a Gaussian surface this is the type that we were doing we would get the Q enclosed right so if this is column
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.