MAT291: Lecture 17 - Triple Integrals in Cylindrical Coordinates
Overview
Parinaz Naseri develops triple integration in cylindrical coordinates by deriving the Jacobian factor r, interpreting the volume element as r dr dθ dz, and showing how to translate regions and bounds from Cartesian coordinates. Worked examples find a cylinder-bounded volume of 24π, evaluate an integral involving e^(-(x²+y²)) as (9π/2)(1-e^-4), and calculate the mass between a cone and a paraboloid as 11π/12.
Key takeaways
- For x=r cos θ, y=r sin θ, and unchanged z, the cylindrical Jacobian has magnitude r, so every triple integral must include the factor r dr dθ dz.
- The factor r converts an angular change dθ into the physical arc length r dθ, which is why the cylindrical volume element is r dr dθ dz.
- A cylinder of radius 2 bounded by z=0 and z=6-x-y has volume 24π because the full-circle integrals of cos θ and sin θ cancel.
- For z e^(-(x²+y²)) over a radius-2, height-3 cylinder, cylindrical coordinates yield the separable integral and value (9π/2)(1-e^-4).
- The cone z=r and paraboloid z=2-r² meet at r=1, establishing the radial limit for the solid between them.
- With density σ=z in the cone-paraboloid solid, integrating z r over r≤z≤2-r² and 0≤r≤1 gives mass 11π/12.
Chapters
- A point (x,y,z) is represented by (r,θ,z), with x=r cos θ, y=r sin θ, and z unchanged.
- The radius r and angle θ describe the point's projection onto the xy-plane, just as in polar coordinates.
- Cylindrical coordinates are useful when regions include disks, rings, cylinders, or other circular geometry.
- The Jacobian determinant for x=r cos θ, y=r sin θ, z=z has absolute value r.
- The volume element changes from dx dy dz to r dr dθ dz, with the extra r accounting for angular arc length.
- The differential order can vary, such as dz dr dθ, as long as the bounds match the chosen order.
- A small cylindrical volume has radial thickness dr, height dz, and angular arc length r dθ, giving volume r dr dθ dz.
- At constant z, the area element in the xy-plane is r dr dθ; at constant θ, it is dr dz.
- At constant r, the area element is r dθ dz, since r dθ is the arc length.
- A common setup bounds z between two surfaces z1(r,θ) and z2(r,θ), then describes the projected region using r and θ.
- If the z-bounds depend on r and θ, integrate with respect to z first, followed by the projected-region variables.
- For an angular interval α≤θ≤β, the integral includes the Jacobian factor r and bounds for r and θ.
- The solid lies above z=0, below z=6-x-y, and inside x²+y²≤4, so cylindrical bounds are 0≤r≤2 and 0≤θ≤2π.
- Convert the upper surface to z=6-r cos θ-r sin θ and integrate 1 with volume element r dz dr dθ.
- Over a full 0-to-2π cycle, the cosine and sine terms integrate to zero, leaving volume 24π.
- For z e^(-(x²+y²)) over 0≤z≤3 and 0≤r≤2, cylindrical coordinates turn the exponential into e^(-r²).
- The region has independent bounds 0≤r≤2, 0≤θ≤2π, and 0≤z≤3, so the integral separates into three single-variable integrals.
- Using the Jacobian factor r gives the result (9π/2)(1-e^-4).
- The lower surface is the cone z=√(x²+y²), which becomes z=r.
- The upper surface is the paraboloid z=2-x²-y², which becomes z=2-r².
- The density is σ(x,y,z)=z, so integrating σ over the bounded solid gives its total mass.
- The cone and paraboloid intersect where r=2-r²; the positive solution is r=1.
- The projection of the solid is the full disk 0≤r≤1, with 0≤θ≤2π.
- The z-bounds depend on r, so the integral must begin with z from r to 2-r² rather than separating all three integrations.
- Set up the mass integral as ∫₀²π∫₀¹∫ᵣ^(2-r²) z r dz dr dθ.
- Integrating over z produces one-half of [(2-r²)²-r²], multiplied by the cylindrical Jacobian r.
- The radial and angular integrations give a total mass of 11π/12.
Transcript excerpt
0:02 Okay, so let's move on to the second coordinate system that we are interested in and that's cylindrical coordinate system. Cylindrical coordinate system is the first coordinate system in 3D that we look at. So we want to look at uh the change of variables that we would need to do in order to calculate a triple integral in this coordinate system. Just like before, the flow is the same as we did yesterday. We look at the Jacobian, we look at some examples where the cylindrical coordinate system is more useful than uh the Cartesian one. So remember that
0:55 in polar coordinates, we were converting X and Y to R and theta, right? Or vice versa. So every point in the 2D space or 2D plane of XY could be converted to its description based on R and theta. And we learned that d x d y here d x d y which was an area area element in XY domain would be converted to r dr d theta in polar coordinate
1:45 system basically. Okay, and we said that R actually just beside the fact that it's a scaling factor and it it is derived from the Jacobian matrix, it has a very important role because it converts d theta, which is the angle type change, to a length type change. Now, if you remember in cylindrical coordinate system, things were very similar to polar coordinate. Right? The only difference we had was that z would come into the game as the third coordinate coordinate. So, here every point x, y, z
2:36 you could describe this using r, theta, and z as the unit elements of the cylindrical coordinate system. So, here if I draw a circle and then I project the circle exactly in the xy plane then I can say this is r
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.