MAT291: Lecture 19 - Scalar Integrals over Curves
Overview
Parinaz Naseri develops scalar line integrals over parametrized curves, showing how to replace arc length by speed times time: ∫C f ds = ∫ f(r(t))‖r′(t)‖ dt. She applies the method to curve length, average value, the mass of a helix with density z, and a circle formed by intersecting a sphere of radius 3 with the plane 2x + y + 2z = 3.
Key takeaways
- For a smooth parametrized curve r(t), arc length changes at the rate ‖r′(t)‖, so every scalar line integral becomes an ordinary integral in t with that speed factor.
- Curve orientation is encoded by the parametrization: for 4x² + 9y² = 36, (3 cos t, −2 sin t) travels clockwise, while changing the sign of one coordinate reverses direction.
- The integral ∫C 1 ds measures curve length, while dividing ∫C f ds by that length gives the average value of f along the curve.
- The helix r(t) = (cos t, sin t, t) has constant speed √2; with density σ = z = t over 0 ≤ t ≤ 2π, its mass is 2√2π².
- A circle cut from a sphere of radius R by a plane at distance D from the sphere’s center has radius √(R² − D²); its center and an orthonormal in-plane pair provide a general parametrization.
- For the sphere x² + y² + z² = 9 and plane 2x + y + 2z = 3, the intersection-circle radius is 2√2, and the integral of x² around it is 32√2π/3.
Chapters
- A curve in 3D is described by r(t) = (x(t), y(t), z(t)), with time t determining the position.
- Unlike an implicit equation such as f(x,y,z) = 0, a parametrization also records the direction of travel.
- Using t handles curves where x, y, and z all change together, rather than relying on one coordinate as the independent variable.
- The ellipse 4x² + 9y² = 36 becomes x²/9 + y²/4 = 1 after dividing by 36.
- Using cosine and sine gives x = 3 cos t and y = ±2 sin t; the sign choices determine orientation.
- For clockwise travel starting at (3,0), choose r(t) = (3 cos t, −2 sin t), so t = π/2 reaches (0,−2).
- The Riemann-sum interpretation of ∫C f ds adds function values along the curve, each weighted by a small arc-length segment Δs.
- For a parametrization r(t), the differential arc length is ds = ‖r′(t)‖ dt.
- The working formula is ∫C f ds = ∫aᵇ f(r(t))‖r′(t)‖ dt, substituting x(t), y(t), and z(t) into f.
- Setting f = 1 gives ∫C 1 ds, which equals the length of the curve.
- The average value of f over a curve of length L is (1/L)∫C f ds.
- These interpretations apply to general paths, including a curved wire whose length or average density is needed.
- The wire follows r(t) = (cos t, sin t, t) for 0 ≤ t ≤ 2π, with linear density σ(x,y,z) = z.
- Its velocity is r′(t) = (−sin t, cos t, 1), whose speed is √(sin²t + cos²t + 1) = √2.
- Substituting z = t gives mass ∫₀²π t√2 dt = 2√2π².
- A circle in a plane requires its center C, radius ρ, and two perpendicular unit vectors û and v̂ parallel to the plane.
- Both û and v̂ must be perpendicular to the plane’s unit normal n̂, and they must be perpendicular to each other.
- The parametrization C + ρ(cos t û + sin t v̂), for 0 ≤ t ≤ 2π, has constant speed ρ.
- The example intersects the sphere of radius 3, x² + y² + z² = 9, with the plane 2x + y + 2z = 3.
- The plane’s normal is (2,1,2), with length 3, so its unit normal is n̂ = (2,1,2)/3.
- The plane is distance 1 from the origin, placing the circle’s center at C = n̂ and giving radius ρ = √(3² − 1²) = 2√2.
- One valid in-plane unit vector is û = (2,−2,−1)/3, which has dot product zero with n̂.
- Taking a cross product gives v̂ = (−1,−2,2)/3; it is unit length and perpendicular to both û and n̂.
- Substituting C, ρ, û, and v̂ into C + ρ(cos t û + sin t v̂) produces coordinates that satisfy 2x + y + 2z = 3 for every t.
- For f = x², substitute the parametrized x(t) into the integrand and use ds = ρ dt = 2√2 dt.
- Integrate over one full revolution, 0 ≤ t ≤ 2π, using the squared sine and cosine terms.
- The resulting scalar line integral is ∫C x² ds = 32√2π/3.
Transcript excerpt
0:01 So, yes, in this topic, which is the calculus of integrating scalar functions over curves, what we're going to look at is actually integrating a single variable, but that single variable is going to change a 3D function. So, the function is not the single variable. This The function is a still can be defined in a 3D space, but the integration is of a single variable. Um well, it's a single variable. Okay? >> [snorts] >> So, here, previously, you worked with like integration of f x y z dx dy dz, for example, or any other variables you learned from other coordinate systems.
0:49 Here, what we are interested in is a new variable that we call time, t. Okay? And, in order to define the geometry, we're going to look at curves specifically. So, curves are the geometry that we are interested in. Previously, you've seen surfaces defined in 3D or 2D geometries. Here, this is a curve, so it has only one single variable, but it can be drawn in 3D. Okay? That's the difficult part about this. How to define the curve based on this time variable? So, you can define a curve with
1:38 basically saying, "What is the coordinate of a point at a specific time?" >> [snorts] >> So, at any point, at any time, basically, t, your coordinate can change to x t y t z t. And then, you can specify the position of that point with the vector RT. Remember position vectors? It's basically defined in 3D space. It has three coordinates XYZ. And now the XYZ that we defined depends on another variable, time. A car that is moving on a road, a ball that is moving on I don't know, like something like a roller coaster, anything like that. You
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.