CE 312 Lecture 06: Reactions IV, Internal Hinges (2026.08.28)
Overview
Gregory Michaelson explains how internal hinges release bending moment and provide an extra equation of condition for solving statically determinate structures. He analyzes a beam with three vertical supports, reduces its distributed loads to resultants, uses a hinge section cut to find reactions of 20, 63, and 9 kips, and warns that distributed loads must be re-idealized when a section cut changes the modeled length.
Key takeaways
- An internal hinge releases bending moment, so a section cut through it provides the known condition M = 0 while still allowing axial force and shear to act.
- For the example beam, whole-structure equilibrium gives 2,430 foot-kips = 30B_y + 60C_y and A_y + B_y + C_y = 92 kips; the hinge cut supplies C_y = 9 kips, leading to B_y = 63 kips and A_y = 20 kips.
- When drawing a section free body, choose the side with fewer loads; analyzing the hinge-to-C segment lets the moment equation isolate C_y without including the other beam loads.
- A distributed load’s equivalent point load must be recalculated after a cut: 2 kips per foot over the full 10-foot span gives 20 kips at 5 feet, but over a 6.5-foot segment it gives 13 kips at 3.25 feet.
- Consistent section-cut sign conventions support later diagramming: downward shear and counterclockwise moment are positive on a left-side cut, while upward shear and clockwise moment are positive on a right-side cut.
- A roller constrains motion normal to its surface but can develop either an upward or downward reaction; assume a direction and let the calculated sign determine the actual direction.
Chapters
- Gregory Michaelson introduces internal hinges as the final fundamental reaction-analysis tool in CE 312.
- The homework has one longer problem, and homework 2.4 is due Monday.
- Although modern structures use internal hinges less often, hinge analysis is useful for later tasks such as constructing influence lines.
- An internal release is a point where a specified structural response is known because that response is released.
- The most common example releases internal moment, which is modeled as a hinge; releases of shear or axial force are also possible.
- A beam splice connecting webs but not flanges can be idealized as a hinge because it transfers shear more effectively than moment.
- Older bridges may use pin-and-hanger connections that function as internal hinges.
- A cut through an ordinary beam exposes equal-and-opposite internal axial forces, shear forces, and moments on its two faces.
- A cut through a hinge has internal axial force and shear, but its internal moment is known to be zero.
- That zero-moment condition is the key equation used to solve the remaining support reactions.
- Adding a hinge increases the equations of condition; a stable determinate structure may require additional reactions to balance the added condition.
- For a left-side free-body diagram, downward shear and counterclockwise moment are positive; for a right-side diagram, upward shear and clockwise moment are positive.
- Axial tension is treated as positive and compression as negative.
- Consistent shear and moment signs make graphical shear-force and bending-moment diagram construction easier.
- Structural software reports signed values, so users must understand the sign convention to interpret tension, compression, shear, and moment.
- The example beam has reactions at A, B, and C, plus a horizontal reaction at A; its internal hinge makes the structure statically determinate.
- The 2-kip-per-foot load over 15 feet becomes a 30-kip resultant located 7.5 feet from its start.
- The triangular load with a 4-kip-per-foot peak over 15 feet becomes a 30-kip resultant located 5 feet from support B.
- The 1.2-kip-per-foot load over 15 feet becomes an 18-kip resultant located 7.5 feet from its start.
- Summing moments about A gives 2,430 foot-kips = 30B_y + 60C_y, using the four load resultants and their moment arms.
- Summing vertical forces gives A_y + B_y + C_y = 92 kips.
- The two whole-beam equations do not individually determine all three vertical reactions, so Michaelson records them and uses the hinge condition for another equation.
- The horizontal equilibrium equation immediately gives A_x = 0 because there are no applied horizontal loads.
- Michaelson cuts through the internal hinge and analyzes the right-hand segment, where a 15-foot span carries the 1.2-kip-per-foot load and ends at roller C.
- The right-segment load is an 18-kip resultant 7.5 feet from the hinge; summing moments at the hinge gives 18 × 7.5 = 15C_y, so C_y = 9 kips upward.
- Substituting C_y into the whole-beam moment equation gives B_y = 63 kips upward.
- Using the 92-kip total vertical load gives A_y = 20 kips upward; the final reactions are A_x = 0, A_y = 20, B_y = 63, and C_y = 9 kips.
- An efficient approach is to solve the hinge-side free body first, then return to the whole structure and use the known reaction in equilibrium equations.
- After finding the hinge shear, a student may also analyze the opposite side as a separate free body; Michaelson says this is valid, though it connects more directly to later shear and moment diagrams.
- Selecting the side of a cut with fewer loads reduces calculations and opportunities for sign or arithmetic errors.
- A roller can exert either an upward or downward vertical reaction, even though it cannot resist force parallel to its supporting surface.
- For a 2-kip-per-foot load over 10 feet, the full-beam equivalent is 20 kips located 5 feet from A.
- A section cut 6.5 feet from A creates a new left-side model containing only 6.5 feet of that load, so its resultant is 13 kips, not 20.
- The partial-load resultant acts at the midpoint of the retained 6.5-foot segment, 3.25 feet from A, rather than at the full-load centroid.
- For the upcoming homework, re-idealize each distributed load over the portion included in the chosen free-body diagram.
Transcript excerpt
0:00 All >> [clears throat] >> right, let's get started. Um, one thing I might do, hold on, let me let me do something real quick. Hold on. Let me uh let me try something. I think I might start putting the QR code up top. uh moving forward because one of the things I'm noticing on I guess the most recent edition of PowerPoint is that the little co-pilot button shows up here at the bottom and it's cutting off my QR codes. So I might start putting the QR code up there. So um I just noticed that just now. I didn't notice it just now, but I just thought of that like let's uh let's move that up there. So I'll I'll try and start putting it up top for the uh the next um uh moving forward. That might
0:47 make it a little easier to scan. Um, okay. Uh, how did homework uh 2.3 go? Not bad. Okay. Um, so this homework assignment is only going to have one problem, not two. Um, just because it's a tad longer. Um, and you'll see what I mean after we uh we discuss our topic today, which is dealing with internal hinges. And it's basically the last fundamental analysis tool that we need to be able to deal with. Um, as we mentioned, um, or as I as I discussed previously, internal hinges do have a physical counterpart. Um, you you can see them in real life. Um, admittedly, you don't see them as much in modern structural uh uh design, but we still
1:37 need to be able to deal with them because internal hinges themselves are analytical tools that we can use for later tasks. Um, one big one is the construction of an influence line. Internal hinges show up there. So, being
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Gregory Michaelson.