9.8 Solve Quadratic Inequalities --Lesson 40--FA26--Math190
Overview
Rachel Soyk teaches a four-step method for solving quadratic inequalities: move all terms to one side, find critical values by factoring or using the quadratic formula, test each interval, and express the solution in interval notation. Four examples produce solutions including [-6, 5], (-∞, -7) ∪ (-2, ∞), and intervals bounded by roots involving √5, while reinforcing how strict versus inclusive inequalities determine endpoint circles.
Key takeaways
- A quadratic inequality is easiest to analyze after rewriting it with 0 on one side, because its zeros then mark the critical points that partition the number line.
- Testing one value in every interval between critical points determines the quadratic's sign throughout that interval.
- Use closed endpoints when the inequality is ≤ or ≥, as in the solution [−6, 5] for x² + x − 30 ≤ 0; use open endpoints for strict inequalities.
- A positive quadratic can have two separate solution intervals, as x² + 9x + 14 > 0 does outside its roots −7 and −2.
- When factoring is not readily available, the discriminant and quadratic formula can locate the intervals; x² + 6x + 4 has roots −3 ± √5 and is negative between them.
- Multiplying or dividing an inequality by a negative number reverses its comparison symbol.
Chapters
- Rachel Soyk distinguishes quadratic inequalities from equations by their <, >, ≤, or ≥ symbols.
- The method starts by moving every term to one side so the other side is 0, then factoring or finding zeros with the quadratic formula.
- Critical values divide the number line into intervals; test one value in each interval to determine where the quadratic is positive or negative.
- Use closed endpoints for ≤ or ≥ and open endpoints for < or >, then write the selected intervals in interval notation.
- For x² + x − 30 ≤ 0, factor the quadratic as (x + 6)(x − 5), giving critical values −6 and 5.
- Because the inequality includes equality, place closed circles at both critical values.
- Testing −7, 0, and 6 shows positive, negative, and positive results across the three intervals.
- Select the negative interval and include its endpoints: the solution is [−6, 5].
- Adding 14 to both sides puts the inequality in standard form: x² + 9x + 14 > 0.
- Factor as (x + 7)(x + 2), with critical values −7 and −2.
- The strict > 0 symbol means the roots are excluded; testing −8, −3, and 0 identifies positive intervals outside the roots.
- Join the two selected intervals with a union: (−∞, −7) ∪ (−2, ∞).
- The factor pairs of 4 cannot produce a middle coefficient of 6, so use the discriminant b² − 4ac = 36 − 16 = 20.
- The quadratic formula gives roots −3 − √5 and −3 + √5; the discriminant being positive confirms two real critical values.
- Rachel Soyk estimates √5 as about 2.2, placing the roots near −5.2 and −0.8 to help choose test values.
- Testing values such as −10, −2, and 0 shows the quadratic is negative only between the roots, so the solution is (−3 − √5, −3 + √5).
- For −2x² + 5x + 3 ≥ 0, the AC method uses a·c = −6 and the pair 6 and −1 to factor the expression as (x − 3)(−2x − 1).
- Setting each factor to zero gives critical values 3 and −1/2; both receive closed circles because equality is included.
- Testing −1, 0, and 4 identifies the positive interval between the roots, giving the solution [−1/2, 3].
- The closing review notes that multiplying or dividing both sides by a negative reverses the inequality and that every interval between critical values needs a test point.
Transcript excerpt
0:03 Section 9.8 our last section of math 490 dealing with solving quadratic inequalities. So back to the inequalities, creating number lines, the whole picking test intervals uh to figure out if they're positive or negative between our critical points in order to get uh our final result. We have three learning objectives in this section, being able to solve quadratic inequalities algebraically, uh write the solutions and interval notation, and then last but not least, being able to interpret these solutions
0:51 from a graphical standpoint. All right. So what are the steps in order to solve the quadratic inequality? Well, first off, this is kind of like a recap of what we did last class, except last class we were dealing with quadratic equations. The subtle difference between equations and inequalities, equations just have equal signs. Inequalities either have less than, greater than, less than or equal to, or greater than equal to. But we are still dealing with a quadratic. And so what is our first step? We want to move everything over to one hand side one side so that the right hand side is
1:40 zero. Uh and then obviously put it in that standard form where your highest term comes first and then it's in descending order. Second step is being able to factor that left hand side, so factor that yellow blob uh so that you use your zero product property in order to find the zeros, to find those critical points that you're going to put on your number line so that you can, in the third step, test those intervals, um, to see where it is positive versus where it's negative. The sole purpose of that is we are dealing with inequalities. So this greater than zero
2:29 in this scenario means all values that
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Rachel Soyk.