Math 30 - Day 17 - Linear Factorization Theorem and Arrow Notation
Overview
Christopher Lee teaches how the linear factorization theorem and the complex conjugate theorem help construct real-coefficient polynomials from their zeros, then uses a known function value to determine the leading coefficient. The lesson shifts to rational functions, using arrow notation, reciprocal-function graphs, asymptotes, and graph transformations to describe local and end behavior.
Key takeaways
- A real-coefficient polynomial with a non-real zero a + bi must also have the conjugate zero a - bi, so complex roots should be added in pairs when constructing its linear factors.
- For zeros -3, 2, and i, the required fourth zero is -i; using f(-2) = 100 determines A = -5 and produces f(x) = -5x⁴ - 5x³ + 25x² - 5x + 30.
- For the cubic with zeros 5 and -2i and condition f(1) = 10, the conjugate root 2i yields f(x) = -1/2x³ + 5/2x² - 2x + 10.
- Arrow notation separates one-sided local behavior from end behavior: x → a⁻ and x → a⁺ indicate approach from the left and right, while x → ±∞ describes unbounded input.
- For f(x) = 1/x, the vertical asymptote x = 0 has opposite one-sided limits, while the horizontal asymptote y = 0 describes the function's behavior as x → ±∞.
- Shifting 1/x left two units and up three moves its asymptotes to x = -2 and y = 3; the same shift rule applies to the reciprocal-squared graph.
Chapters
- A degree-n polynomial has n complex zeros when multiplicities are counted, and can be expressed using n linear factors of the form x - c.
- For a polynomial with real coefficients, a non-real zero a + bi requires its conjugate a - bi to also be a zero.
- Lee identifies this paired-root rule as the complex conjugate theorem.
- Convert each zero c into a factor x - c.
- Multiply the factors to obtain a polynomial expression.
- Use a supplied point (c, f(c)) to solve for the leading coefficient, then simplify.
- The example gives zeros -3, 2, and i, with real coefficients, so the conjugate zero -i is also required.
- The four factors are (x + 3)(x - 2)(x - i)(x + i).
- Pairing the conjugate factors gives (x - i)(x + i) = x² + 1; multiplying all factors yields x⁴ + x³ - 5x² + x - 6.
- Write the polynomial as A(x⁴ + x³ - 5x² + x - 6), retaining an unknown leading coefficient A.
- Substitute x = -2: the expression in parentheses evaluates to -20.
- Solving -20A = 100 gives A = -5, so f(x) = -5x⁴ - 5x³ + 25x² - 5x + 30.
- The example's zero i requires -i because the polynomial has real coefficients.
- Lee checks the same rule with 2 + 3i: 2 - 3i must also be a zero.
- A supplied non-real zero therefore brings its conjugate into the factor list even if the problem does not state it separately.
- The exercise asks for a real-coefficient cubic with zeros 5 and -2i, and with f(1) = 10.
- The complex conjugate theorem supplies the third zero, 2i, making the factors (x - 5)(x + 2i)(x - 2i).
- The class first combines the conjugate factors before expanding the cubic.
- The conjugate factors multiply to x² + 4, so the cubic becomes A(x - 5)(x² + 4).
- Expansion gives A(x³ - 5x² + 4x - 20).
- Substituting x = 1 makes the parenthetical expression -20, so A = -1/2 and f(x) = -1/2x³ + 5/2x² - 2x + 10.
- The cost model is C(x) = 15,000x - 0.1x² + 1,000 for producing x items.
- Average cost per item is found by dividing the cost function by x.
- A variable in the denominator motivates the transition from polynomial functions to rational functions.
- Lee reviews f(x) = 1/x, whose branches lie in quadrants I and III.
- He compares it with f(x) = 1/x², whose branches are both above the x-axis.
- Both graphs approach the coordinate axes without reaching them, illustrating horizontal and vertical asymptotes.
- The superscript minus in x → a⁻ means x approaches a from the left; the plus in x → a⁺ means approach from the right.
- The notation x → ∞ and x → -∞ describes inputs increasing without bound to the right or left.
- Writing f(x) → ±∞ describes output values, or y-values, increasing or decreasing without bound.
- The function 1/x is undefined at x = 0 because division by zero is not allowed.
- For inputs -0.1, -0.01, and -0.001, the outputs are -10, -100, and -1,000, showing that 1/x → -∞ as x → 0⁻.
- From the right, 1/x → +∞ as x → 0⁺; as x → ±∞, the function approaches 0.
- A vertical asymptote is a line x = a approached as f(x) tends to positive or negative infinity.
- For f(x) = 1/x, x = 0 is a vertical asymptote, with opposite behavior on either side: -∞ from the left and +∞ from the right.
- The graph approaches the asymptote but the function is undefined at x = 0.
- For f(x) = 1/x, f(x) → 0 as x → ∞ and also as x → -∞.
- A horizontal asymptote is a line y = b that the graph approaches as the input increases or decreases without bound.
- The reciprocal function's horizontal asymptote is y = 0.
- Lee has students describe both vertical and horizontal asymptotes by following the graph's branches.
- The example graph has a vertical asymptote at x = 2 and a horizontal asymptote at y = 4.
- Its branches show x → 2⁺ gives f(x) → ∞, x → 2⁻ gives f(x) → -∞, and both x → ∞ and x → -∞ give f(x) → 4.
- For f(x) = 1/x², both sides of the vertical asymptote x = 0 rise toward positive infinity.
- The graph approaches zero at both ends, so f(x) → 0 as x → ∞ and as x → -∞.
- Lee distinguishes input behavior from output behavior by reading x as the horizontal coordinate and f(x) as the vertical coordinate.
- The transformation shifts the reciprocal graph two units left and three units up.
- The vertical asymptote moves from x = 0 to x = -2, and the horizontal asymptote moves from y = 0 to y = 3.
- The graph's end behavior becomes f(x) → 3 as x → ∞ and as x → -∞.
- At the shifted graph's vertical asymptote, x → -2⁻ gives f(x) → -∞, while x → -2⁺ gives f(x) → ∞.
- At both ends of the graph, x → ±∞ gives f(x) → 3, confirming the horizontal asymptote y = 3.
- For practice, sketch 1/x² shifted three units right and four units down, then identify its vertical and horizontal asymptotes.
Transcript excerpt
0:00 All right, we good. Any questions anybody got? Any math questions about anything? Go ahead. Yeah, yeah, yeah, yeah. Oh, my fault. Here you go. All right. So, no other questions? All right, cool. Let's look at what we getting into today, all right? We kind of just picking up where we left off a little bit. And we just going to run it forward. All right? So, we're going to talk about using
0:48 linear factorization theorem to find polynomials with given zeros. This is awesome, right? So, this is literally the reverse of what we talked about last time, right? So, a vital implication of the fundamental theorem of algebra, as we stated above, is that a polynomial function of degree n will have n zeros in the set of complex numbers, if we allow for multiplicities. This means that we can factor the polynomial function into n factors. The linear factorization theorem tells us that a polynomial function will have the same number of factors as its degrees, and that each factor will be of the form x minus c, where of course c is a complex number. Let f be a polynomial function with real
1:37 coefficients, and suppose that a plus bi, where b does not equal zero, is a zero of f of x. Then, by the factor theorem, x minus a plus bi is a factor of f of x. For f to have real coefficients, x minus a minus bi must also be a factor of f of x. This is true because any factor other than x minus a minus bi when multiplied by x minus a plus bi will leave imaginary components of the product, right? Only multiplication with conjugate pairs will eliminate the imaginary parts and result in real coefficients. In other words, if
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Christopher Lee.