Math 30 - Day 3 - Rates of Change and Behavior of Graphs
Overview
Christopher Lee reviews how to read interval notation and determine domains and ranges from graphs and common toolkit functions, then introduces average rate of change as change in output divided by change in input. Examples include gasoline prices rising an average of about $0.196 per year from 2005 to 2012 and falling about $0.215 per year from 2007 to 2009, with the sign interpreted as an increase or decrease.
Key takeaways
- A graph's domain is read horizontally across x-values and its range vertically across y-values; arrows indicate continuation beyond the visible window, while open and filled endpoints determine whether bounds are excluded or included.
- For common parent functions, y = x² and y = |x| both have range [0, ∞), while y = 1/x excludes zero from both domain and range and y = ∛x has all real numbers as both domain and range.
- A real square-root expression requires its radicand to be nonnegative; solving that inequality gives the domain, and an outside negative sign reflects the outputs into nonpositive values.
- Average rate of change is Δy/Δx, or [f(x₂) - f(x₁)]/(x₂ - x₁); subtract in the same order on top and bottom to preserve the correct sign.
- From 2005 to 2012, gasoline's average price increase was $1.37 over seven years, or about $0.196 per year; from 2007 to 2009, the average change was -$0.215 per year, indicating a decrease.
- A rate's sign describes direction: a negative rate means the output falls as the input rises, and the units express output per input, such as dollars per gallon per year.
Chapters
- Christopher Lee checks for questions about the previous week's homework and identifies unfinished material from assignment 4.2.
- The class begins with a review of graph and interval-notation concepts before moving into new examples.
- A filled endpoint means the value is included, while an open endpoint means it is excluded.
- An arrow on a number line represents a ray that continues without bound, so use infinity to describe the highlighted values.
- The example includes two portions of the number line, ending at -2 and spanning from -1 toward 3.
- Set-builder notation uses curly braces and a vertical bar read as “such that,” as in values of x satisfying stated inequalities.
- The reviewed inequalities distinguish included endpoints, such as x ≤ -2 and -1 ≤ x, from the excluded endpoint x < 3.
- In interval notation, combine separate sections with a union symbol and always use parentheses next to infinity.
- The domain is the set of x-values where the graph exists, read horizontally along the x-axis.
- The range is the set of y-values attained by the graph, read vertically along the y-axis.
- Arrows can show that a graph continues beyond the visible plotting window, so do not mistake the edge of the picture for an endpoint.
- For the illustrated unbounded graph, the domain begins at included x = -5 and continues right, written [-5, ∞).
- Its range extends downward without bound and reaches included y = 5, written (-∞, 5].
- Write intervals from smaller to larger values: left to right for domain and bottom to top for range.
- A bounded graph example has domain (-3, 1], using an open endpoint at -3 and a filled endpoint at 1.
- The graph's y-values run from included -4 to included 0, giving the range [-4, 0].
- Christopher Lee uses a supermarket comparison of two water-bottle packs to connect mathematical comparisons with finding the better per-unit value.
- An oil-production graph covers the years 1970 through 2010, so its displayed time domain is [1970, 2010].
- The oil graph's output values run from about 200 to 2,000, defining its range.
- A population graph covers 1950 to 2000 and shows population rising from about 45 million to 90 million.
- For a constant function such as y = 8, every real x is allowed, so the domain is (-∞, ∞).
- The only output is 8, represented in interval notation as [8, 8].
- A horizontal line's range is its constant y-value, not every value between negative and positive infinity.
- The identity function f(x) = x has domain and range (-∞, ∞), since every real input returns the same real output.
- The absolute-value function f(x) = |x| also accepts every real input, but its outputs cannot be negative.
- The absolute-value range is [0, ∞), reflecting that distance from zero is nonnegative.
- The quadratic parent function y = x² has domain (-∞, ∞) and range [0, ∞).
- For y = 1/x, zero is excluded from the domain because division by zero is undefined.
- The reciprocal function also never outputs zero, so both domain and range are (-∞, 0) ∪ (0, ∞).
- The function y = 1/x² excludes x = 0, giving domain (-∞, 0) ∪ (0, ∞), while its positive outputs give range (0, ∞).
- For y = √x, negative inputs are not real-valued, so both domain and range are [0, ∞).
- The cube-root function y = ∛x accepts and produces every real number, giving domain and range (-∞, ∞).
- Exclude inputs that make a denominator zero, since division by zero is undefined.
- Exclude inputs that produce nonreal or undefined outputs, such as taking a real square root of a negative number.
- Use valid inputs to determine possible outputs, then check the result against a graph or table of values.
- For f(x) = 2x³ - x, there is no denominator or square-root restriction, so every real input is allowed.
- Christopher Lee identifies the domain as (-∞, ∞) and the range as (-∞, ∞) for this cubic polynomial.
- A calculator graph or table can be used to confirm the function's behavior.
- In the rational-function example, x = 1 makes the denominator zero and must be excluded from the domain.
- The domain is expressed as (-∞, 1) ∪ (1, ∞), with parentheses at the prohibited input.
- The function cannot output zero, so its range is (-∞, 0) ∪ (0, ∞).
- For an expression containing √(x + 4), require the radicand to satisfy x + 4 ≥ 0, producing domain [-4, ∞).
- The square root reaches zero at x = -4 and grows without bound, giving range [0, ∞).
- For √(2 - x), requiring 2 - x ≥ 0 gives x ≤ 2 and domain (-∞, 2]; an outside negative sign makes the outputs nonpositive.
- The lesson treats average gasoline cost as a function of year, using annual data from 2005 through 2012.
- The price rises from $2.31 per gallon in 2005 to $3.68 in 2012, a total increase of $1.37 over seven years.
- The example motivates comparing how much an output changes per unit change in its input, rather than considering only the total change.
- Rate of change describes how an output quantity changes relative to a change in the input quantity.
- The average rate of change between two inputs is (y₂ - y₁)/(x₂ - x₁), equivalently Δy/Δx or [f(x₂) - f(x₁)]/(x₂ - x₁).
- The result's units are output units per input unit, such as dollars per gallon per year in the gasoline example.
- The Greek letter delta, Δ, means change, calculated by subtracting one quantity from another.
- A rate can use y₂ - y₁ over x₂ - x₁ or reverse both subtractions; reversing only one changes the sign incorrectly.
- Christopher Lee's pen-length analogy emphasizes that measuring in either direction gives the same rate when numerator and denominator orders match.
- From 2005 to 2012, the $1.37 increase over seven years gives an average rate of about $0.196 per gallon per year.
- Other rate examples include 40 rats per week, 68 miles per hour, 27 miles per gallon, and a college account changing by $4,000 per quarter.
- A rate's units identify the output quantity and input quantity being compared.
- First calculate the output difference, y₂ - y₁; next calculate the input difference, x₂ - x₁; then divide the two results.
- The average-rate formula is also written as [f(x₂) - f(x₁)]/(x₂ - x₁), with the same consistent ordering rule.
- The procedure is applied to Math 30 homework 1.3.
- Between 2007 and 2009, gasoline prices move from $2.84 to $2.41 per gallon, yielding an average rate of -$0.215 per year.
- Christopher Lee interprets the negative result as a decrease of about 22 cents per gallon per year, rather than describing it as a negative price.
- From 2005 to 2010, the average rate is about +$0.106 per year, or an increase of roughly 11 cents annually.
- A rate is negative when output decreases as input increases; the lesson also notes that output can increase while input decreases and still produce a negative rate.
- From the graph on the interval [-1, 2], the points are (-1, 4) and (2, 1), giving a rate of (1 - 4)/(2 - (-1)) = -1.
- For the formula example f(x) = x² - 1/x on [2, 4], substitute 4 and 2 into the function, then divide f(4) - f(2) by 4 - 2; the result is 49/8.
- When substituting function inputs, retain parentheses around each evaluated function value so subtraction applies to the entire expression.
- Christopher Lee closes by discussing tutoring availability and says he will update students when the schedule is confirmed.
Transcript excerpt
0:05 All right, we Gucci. So, any questions anybody has from last week, homework, anything? >> Right. I got you. We're gonna go through that. Which homework was that? >> 4.2. All right. So, there's a couple more things that we had to finish going through that. So, that's why you need to know about that. But I'm I'm gonna finish that up today. Anything else? >> Just finish it before the end of the
0:52 semester. That don't mean leave it to the end of us. >> Just finish it as soon as you can. You know, like it it's piling up as you can see. You know anything else? >> Question for 18. >> You got to tell me what the number 18 is. >> 18. It said uh fx equals the I forgot what that pattern is. Some some type >> like two bars like that. >> No, it's like a it's like a line with the arrow and then they go down. >> Can you show me?
1:38 >> I'm All right. So, if that's it, then let's just pick up where we left off and then we'll just go forward from there. All right. All right, let's start with a little
2:28 blast from the past real quick. Just going to start off with an example that we didn't get to do, but it's what you call it's still in the same realm of what we're doing. Just give me one sec for my software to open up. Come on. There we go. Everybody was able to get to the videos.
3:27 No problem, right? >> All right, let's start off with this real quick. So it says given um this graph here right you want to tell me in words what is it saying then tell me in set builder
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Christopher Lee.