MAT291: Lecture 27 - Coordinate Transformations
Overview
Parinaz Naseri explains how vector components and differential elements transform between Cartesian, polar, cylindrical, and spherical coordinates, emphasizing that cylindrical and spherical unit vectors depend on position. The lecture develops the length, surface, and volume elements used in circulation, flux, and divergence integrals, then applies spherical-coordinate formulas to a vector-field conversion and a spherical-cap area and flux calculation.
Key takeaways
- Polar, cylindrical, and spherical basis vectors rotate with position, so converting a vector from Cartesian components requires evaluating the transformation matrix at the point where the vector is specified.
- The transpose of the orthogonal coordinate-transformation matrix provides the reverse component conversion, avoiding a separate matrix inversion.
- Angular differentials become physical lengths through their coordinate-dependent scale factors: r dθ in polar and cylindrical coordinates, and r dφ plus r sin φ dθ in spherical coordinates.
- Recognizing a surface by its constant coordinate immediately identifies its normal: r̂ for constant r, θ̂ for constant θ, φ̂ for constant φ, and ẑ for constant z.
- The spherical-cap area for r = a and 0 ≤ φ ≤ π/3 is πa²; the flux of the inverse-square radial field r̂/r² through that cap is π and does not depend on the cap radius.
Chapters
- A point in polar coordinates is described by radius r and angle θ measured from the positive x-axis.
- The radial unit vector r̂ points in the direction of increasing r and is normal to circles of constant r.
- Unlike Cartesian x̂ and ŷ, the polar unit vectors r̂ and θ̂ change with the point's angle θ.
- The matrix mapping polar components (vᵣ, vθ) to Cartesian components uses cos θ and sin θ; the reverse transformation uses its transpose.
- The polar length element is dℓ = dr r̂ + r dθ θ̂, with r dθ converting angular change into distance.
- On a circle of constant radius, dr = 0; on a radial line of constant θ, dθ = 0.
- Cylindrical coordinates use x = r cos θ, y = r sin θ, and retain z from Cartesian coordinates.
- A constant-r surface is a cylinder with normal r̂; a constant-θ surface is a half-plane with normal θ̂.
- A constant-z surface is a disk or plane with normal ẑ, and its parameters are r and θ.
- The cylindrical position vector is r r̂ + z ẑ; θ is implicit because it determines the direction of r̂.
- A fixed Cartesian vector can have different cylindrical components at two points because r̂ and θ̂ rotate with θ.
- Converting a Cartesian vector into cylindrical components therefore requires the point's θ coordinate.
- Naseri first represents the vector from P to P′ in Cartesian coordinates, then transforms that same vector at each endpoint.
- The Cartesian-to-cylindrical matrix is the transpose of the cylindrical-to-Cartesian matrix and depends on θ.
- The example uses θ = π/6 at P and θ = π/2 at P′, producing different radial and angular components while the z component stays unchanged.
- The cylindrical length element is dℓ = dr r̂ + r dθ θ̂ + dz ẑ, with the factor r accounting for angular distance from the z-axis.
- For a constant-r cylinder, dS = r dθ dz in the r̂ direction; for constant θ, dS = dr dz in the θ̂ direction.
- For a constant-z disk or ring, dS = r dr dθ in the ẑ direction, while the volume element is dV = r dr dθ dz.
- These elements support circulation integrals using dℓ, flux integrals using n̂ dS, and divergence integrals using dV.
- Spherical coordinates use radius r, azimuth θ, and polar angle φ, with x = r sin φ cos θ, y = r sin φ sin θ, and z = r cos φ.
- Constant r describes a sphere with normal r̂; constant φ describes a cone with normal φ̂; constant θ describes a half-plane with normal θ̂.
- The spherical-to-Cartesian component transformation depends on both θ and φ, and the reverse conversion uses the transpose.
- The position vector is r r̂; the angles are implicit in r̂, so separate θ̂ and φ̂ terms are not needed to locate the point.
- For the field A = (−y, x, z), the Cartesian components must first be evaluated at the specified point P.
- At P, Naseri finds r = 2, φ = π/4 from cos φ = z/r, and θ = π/4 from tan θ = y/x.
- The spherical transformation matrix is evaluated using P's θ and φ values, then transposed to convert the Cartesian components into spherical components.
- The example demonstrates why a vector's spherical components cannot be determined without specifying its location.
- The spherical length element is dℓ = dr r̂ + r dφ φ̂ + r sin φ dθ θ̂.
- A sphere at r = a has dS = a² sin φ dφ dθ in the r̂ direction; a constant-φ cone has area element r sin φ dr dθ.
- A constant-θ half-plane has area element r dr dφ in the θ̂ direction, and the spherical volume element is r² sin φ dr dφ dθ.
- For a cap on r = a with 0 ≤ φ ≤ π/3, integrating over 0 ≤ θ ≤ 2π gives area πa²; the flux of F = r̂/r² through it is π, independent of a.
Transcript excerpt
0:01 Good morning everyone. Happy quiz day. So uh today we are going to cover vectors and coordinates um coordinate transformations. Okay. This is uh part C of uh lecture 25 series. Okay. And the reason I'm covering it first is because so you would have time over the weekend to practice it because all everything we learn uh in today's lecture will be used in 25 A, B and D. Okay? And don't worry by the end of next week you will be in sync with the other lecture uh with the from the other props and then you wouldn't have any issues for quiz 5. Okay? It's just uh pedagogically I feel
0:49 like it's better to cover this first. Okay. So let's go through vectors and coordinate transformation. Part of this you already know it's about polar spherical cylindrical coordinate system. You've seen it before. So I'm going to go through it faster. The part that is transformation I'm going to go through it slower and solve examples on. Okay. But I'll explain why I put everything here as one reference so you can use it for different types of integrals that are coming up in as I said other parts of uh 25 series lectures. So the first one the easy one or 2D version one is the polar coordinate system. Uh you already know that in
1:38 polar coordinate system you are dealing with two variables r and theta right? R is the distance from the point to the origin and you can define a vector R to define the position of that uh point and then also theta is the angle from the positive side of the X-axis to that vector R. Okay, polar coordinate system has two unit vectors R hat and theta hat. It's very
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.