MAT 291: Lecture 25 - Fundamental Theorem Examples (Remaining of Class note 22 + Class note 23)
Overview
Parinaz Naseri applies Stokes' theorem to the same unit-circle boundary using both a flat disk and an upper hemisphere, then connects curl-free fields to path-independent line integrals and scalar potentials. She also examines the field F = (x, y, z)/ρ³, showing why its flux is 4π through a sphere but zero through a spherical shell that excludes the origin.
Key takeaways
- Stokes' theorem gives the same circulation for any suitable spanning surface with the same oriented boundary; the unit-circle example yields π on both the flat disk and upper hemisphere.
- For an implicit surface H(x, y, z) = 0 with H_z ≠ 0, expressing n dS using H_z projects the surface element onto the xy-plane.
- A gradient field has path-independent line integrals: ∫ from A to B ∇ψ · dr = ψ(B) − ψ(A), and the closed-loop proof follows from Stokes' theorem and curl(∇ψ) = 0.
- For F = (2xy, x² + z, y), the potential ψ = x²y + yz + C gives a line integral of 8 from (0, 0, 0) to (1, 2, 3), without parametrizing the path.
- The radial field F = (x, y, z)/ρ³ has zero divergence for ρ > 0 but is undefined at the origin, so a sphere enclosing that singularity has flux 4π.
- A spherical shell excluding the origin has zero total flux: its outer boundary contributes +4π and its inner boundary contributes −4π because the shell's outward normal points toward the origin there.
Chapters
- The boundary is the counterclockwise unit circle x² + y² = 1 in z = 0, and direct calculation gives circulation π.
- For F = (y², x, z²), the curl has only a z component, 1 − 2y.
- The upward normal is +ẑ to match the counterclockwise boundary orientation; polar coordinates give dS = r dr dθ.
- The disk flux of the curl is π because the 2r sin θ term integrates to zero over 0 ≤ θ ≤ 2π.
- The alternative spanning surface is the upper hemisphere x² + y² + z² = 1 with z ≥ 0.
- For H = x² + y² + z² − 1, the projected oriented surface element is n dS = (x/z, y/z, 1) dx dy.
- Dotting (0, 0, 1 − 2y) with that element leaves (1 − 2y) dx dy over the unit disk.
- The hemisphere therefore also gives π, illustrating that Stokes' theorem permits different spanning surfaces with the same boundary.
- Green's theorem is presented as the two-dimensional counterpart of the divergence theorem and Stokes' theorem.
- It relates flux around a closed planar curve to divergence over the enclosed region.
- Its circulation form relates circulation around a closed curve to the flux of curl through the enclosed flat region.
- For a scalar potential ψ, integrating ∇ψ · dr from A to B gives ψ(B) − ψ(A).
- The result is path independent: curves C₁ and C₂ from A to B have equal integrals of the same gradient field.
- The mountain-height analogy emphasizes that the potential difference depends on the endpoints, not the route.
- Following C₁ from A to B and then −C₂ from B to A creates a closed curve.
- Stokes' theorem converts the closed-curve integral into the surface integral of curl F.
- Setting F = ∇ψ makes curl F = 0, so the closed-loop integral is zero and the C₁ and C₂ integrals match.
- For an electric field E = −∇V, the line integral is determined by the endpoint potential difference, with sign set by the chosen direction.
- The example field is F = (2xy, x² + z, y), and a conservative field can be represented as the gradient of a scalar potential.
- Its curl components cancel: ∂y/∂y − ∂(x² + z)/∂z = 0, the x component is 0, and ∂(x² + z)/∂x − ∂(2xy)/∂y = 0.
- Because the curl vanishes throughout ℝ³, the example field is curl-free and has a potential.
- Matching ∇ψ = (2xy, x² + z, y) gives ψₓ = 2xy, ψᵧ = x² + z, and ψ_z = y.
- Integrating the x component and matching the y and z components yields ψ = x²y + yz + C.
- For O = (0, 0, 0) and B = (1, 2, 3), the fundamental theorem gives ψ(B) − ψ(O) = 8.
- Naseri assigns a direct straight-line parametrization check for practice and says its solution will appear in the annotated notes.
- The divergence theorem equates flux through a closed surface to the volume integral of divergence.
- Internal fluxes cancel when a volume is divided into small boxes, leaving the flux across the outer boundary.
- A closed shell has both an outer and an inner surface, and both boundary components must be included.
- Naseri skips a related box example for a separate solution video and focuses on a shell surrounding a spherical hole.
- The field is F = (x, y, z)/ρ³, where ρ = √(x² + y² + z²).
- For ρ > 0, its divergence is zero: the three component derivatives sum to 3/ρ³ − 3(x² + y² + z²)/ρ⁵ = 0.
- The field is undefined at the origin, so the zero-divergence calculation does not apply there.
- The singular point matters when applying the divergence theorem to volumes that contain the origin.
- On a sphere of radius a, the outward normal is ρ̂ and dS = a² sin φ dφ dθ; integrating F · n dS gives 4π.
- The flux is 4π for every spherical radius a when the normal points outward.
- For the shell 1 ≤ ρ ≤ 2, the outer sphere contributes +4π while the inner boundary's outward-from-the-volume normal is −ρ̂ and contributes −4π.
- The total shell flux is zero because the shell excludes the singular origin; a sphere enclosing the origin has nonzero flux despite zero divergence everywhere else.
Transcript excerpt
0:00 Okay. Hi everyone. Good morning. I hope you had a great weekend. Um, well, let's just start with continuing with the Stokes theorem. The Stokes theorem told us that the circulation over a curved over a closed curve is actually the flux of the curl of that function, right? Remember this from last week? Okay? Then we went through an example and actually solved the fact that if we calculated the circulation, which is f dot t hat over this circle, the red one, which is sitting at z equal to zero,
0:49 and that's a unit circle, x two plus y two equal to one, for the vector f, which was y two x z two, we got the answer for the circulation as pi, right? So that was the circulation calculated directly. Now, in part b, which was left for today, we are asked to use the Stokes theorem with the flat disk and then with the upper hemisphere because something else that was hidden in the Stokes theorem was that it didn't matter what type of surface the curve, the closed curve was enclosing, as long as it was enclosing it completely and it wasn't crossing it at any point. So the flat disk is one
1:37 surface, s one, that can be a candidate for our Stokes theorem. The upper hemisphere can be the second one, the lower hemisphere, and all other other shapes. So in part b, we are calculating curl of f and then we are taking the flux for it, where s here our S1 which is the flat disk. Okay, as you can see in order to do this, we need to calculate curl of F, right? So that's our setup. Then to calculate this, we need curl of
2:25 F which is X hat
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.