EE 2115 - Lec 04 - 2026_09_01 - LTspice
Overview
LTspice is a graphical circuit simulator built around Berkeley's SPICE, which models circuits as components connected between nodes and calculates electrical behavior through nodal analysis. Hiren Trada demonstrates building a resistor circuit, selecting a DC operating point simulation, and using probes and the SPICE netlist to inspect node voltages, voltage differences, current, and power.
Key takeaways
- LTspice represents a circuit through nodes and the components connected between them, as shown explicitly in its SPICE netlist.
- Ground is required as the circuit's voltage reference in the demonstrated LTspice setup; without it, the simulation produces an error.
- A DC operating point analysis, labeled .OP, calculates steady-state node voltages and component currents without running a time-varying simulation.
- LTspice voltage probes can show a node voltage relative to ground or, by dragging between two nodes, the voltage difference between them.
- The example's 10 V supply and measured drops of 1.67 V and 3.33 V illustrate how simulated resistor voltages can be checked against Kirchhoff's Voltage Law.
Chapters
- SPICE, short for Simulation Program with Integrated Circuit Emphasis, originated at UC Berkeley in the 1960s.
- Linear Technology added a graphical interface and broader application around the SPICE simulation engine to create LTspice.
- A brief circuit-building demonstration shows how quickly LTspice can assemble and simulate a circuit.
- LTspice identifies circuit connection points as nodes, with ground serving as the reference for node voltages.
- The SPICE netlist describes which components connect between which nodes, reflecting the simulator's nodal-analysis foundation.
- In the example, node voltages are 10 V, 8.33 V, and 5 V; dragging a voltage probe between nodes measures differences such as 1.67 V across R1 and 3.33 V across R2.
- The example voltage drops sum to the 10 V supply, consistent with Kirchhoff's Voltage Law.
- Place resistors with the R shortcut, rotate them with Ctrl+R on Windows or Command+R on Mac, add a voltage source, and wire the circuit with W.
- Edit resistor and source values by right-clicking; set the example source to 10 V and add ground, which is required for simulation.
- Choose DC operating point, also labeled .OP, from the simulation options to calculate steady-state circuit values.
- Hovering over nodes and resistors displays voltage, current, and dissipated power; series-circuit resistors carry the same current.
Transcript excerpt
0:01 Good afternoon. In this short video, we're going to look at software known as LTspice. This is a very powerful program, very simple, very powerful program to perform circuit simulations and calculations. This is based off of the original program known as SPICE. This was developed at UC Berkeley in the 1960s. It is It's called as simulation program with integrated circuit emphasis. This is Remember, this is during the days when the integrated circuit was first being developed. Okay, so this is a very long time ago. Electronics was just just semiconductor electronics was just being developed and integrated circuits were just being developed. And so having
0:49 a software tool like this was was invaluable. And to this day the 75 years later, it is still the gold standard in circuit simulation. There are many versions of SPICE. It was uh It was open source, so lots of users, enthusiasts, organizations, and institutions around the world could take that and create their own. Linear Technologies is a company that actually took that and put a GUI interface and developed an entire program around it and they call it LTspice. So, let's go over to LTspice window and what I'm going to do first is I'm going to show you Now, this is Windows, so in a Mac, you won't see this menu bar.
1:38 But first, what I'm going to do is I'm just going to very, very quickly create a circuit without any explanation just to show an example of how quickly we can develop a circuit with this. Okay? So >> And there you go.
3:01 A circuit can be built very, very quickly indeed. There is, let's see, that window with the results is not visible here. Hopefully it is, but as soon as I place that, it came up with
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Hiren Trada.