Calculus 1000-Related Rates Examples-(Section 007, November 5 Fall 2026)
Overview
Asghar Ghorbanpour teaches a repeatable method for related-rates problems: identify changing quantities, translate given information into variables, derive an equation connecting those variables, differentiate with respect to time, and evaluate at the specified instant. He applies the method to a 5 m ladder sliding at 0.6 m/s, finding its top descends at 0.8 m/s when it is 3 m high, and to a draining cone-shaped tank, using similar triangles and cone volume to find the water-level rate.
Key takeaways
- A related-rates solution starts by naming the quantities that change; in the ladder example, x and y vary, while the 5 m ladder length stays constant.
- The ladder's geometry gives x² + y² = 25, and differentiating with respect to time introduces both rates through the chain rule.
- At the instant the ladder top is 3 m high, the bottom is 4 m from the wall, and a bottom speed of 0.6 m/s implies a downward top rate of 0.8 m/s.
- In the inverted cone tank, similar triangles give r = 4h/5, allowing the volume formula to be rewritten using only water depth: V = (16π/75)h³.
- When the cone tank drains at 1 m³/hour and the water depth is 4 m, the water level falls at 25/(256π) m/hour, approximately 0.0311 m/hour.
- The modeling sequence of identifying variables, translating given data, finding a governing equation, differentiating, and substituting values also supports later optimization problems.
Chapters
- Ghorbanpour frames related-rates word problems as translating a scenario into variables, equations, and quantities to solve for.
- He emphasizes identifying which quantities vary rather than treating every number in the problem as a variable.
- The same modeling steps will also apply to later optimization problems, although the final calculus technique differs.
- A 5 m ladder leans against a wall while its bottom moves away from the wall at a constant 0.6 m/s.
- The target is the rate at which the top descends when it is 3 m above the ground.
- Ghorbanpour asks students to build the model step by step instead of jumping directly to a calculation.
- Let x be the bottom's distance from the wall and y be the top's height above the ground.
- The ladder length, 5 m, is fixed, so it is a constant rather than a changing variable.
- The given rate is dx/dt = 0.6 m/s; the requested rate is dy/dt when y = 3 m.
- The wall, ground, and ladder form a right triangle, so the changing distances satisfy x² + y² = 25.
- The equation remains valid as the ladder slides because the ladder stays 5 m long and the wall-ground angle stays 90 degrees.
- This relation is the mathematical model connecting the two changing distances.
- Differentiating x² + y² = 25 with respect to time gives 2x(dx/dt) + 2y(dy/dt) = 0.
- At y = 3, the original equation gives x² + 9 = 25, so the positive distance is x = 4 m.
- Substituting x = 4, y = 3, and dx/dt = 0.6 yields dy/dt = -0.8 m/s; the negative sign means the top is moving downward.
- The second scenario is an inverted cone-shaped tank 5 m high with a 4 m base radius.
- Water drains at 1 m³ per hour, and the requested water-level rate is when the water depth is 4 m.
- Ghorbanpour again begins by identifying the changing quantities before choosing an equation.
- The changing quantities are water depth h, surface radius r, and water volume V.
- Because water is draining, dV/dt = -1 m³/hour; the target is dh/dt when h = 4 m.
- The tank's full height of 5 m and base radius of 4 m are fixed dimensions, not variables.
- A vertical cross-section of the tank shows similar triangles for the full cone and the water-filled cone.
- Corresponding dimensions give r/4 = h/5, so the water-surface radius is r = 4h/5.
- The cone volume formula V = (1/3)πr²h describes the water, while the radius-depth relation removes r as an independent variable.
- Substituting r = 4h/5 into V = (1/3)πr²h gives V = (16π/75)h³.
- This single-variable equation connects the draining volume directly to the changing water depth.
- Reducing the model to V and h makes it possible to differentiate without separately finding dr/dt.
- Differentiating V = (16π/75)h³ with respect to time gives dV/dt = (16π/25)h²(dh/dt).
- Using dV/dt = -1 m³/hour and h = 4 m gives dh/dt = -25/(256π) m/hour, approximately -0.0311 m/hour.
- The negative sign indicates that the water level is falling; Ghorbanpour closes by stressing the value of following the modeling procedure in each problem.
Transcript excerpt
0:01 Okay, hello everyone. >> Hello, sir. >> Hello, welcome back to Calculus 1000. Um Well, today as I promised last session, we are going to do um one or two examples for related rates. So, we saw the generality of what will happen. Um I'll quickly recall what what was there and then we will we will do these two examples. Um the examples are a little bit long because I want you to go through these these process very carefully and with some level of awareness, not just randomly doing, "Okay, I know that. I know that." kind of thing.
0:48 Uh so that you build that skill that when you see a different problem, you also try to follow the same steps. Um if we have time, we will start the new section, which is about the local max and if I can give you the the the definition and and I can write down the nature of that to be nice. But uh let's see how the class works. Any questions or any comments before I start? Okay. Well, let's uh Last time we discussed about this related rate, but uh related rate modeling problems or related rate
1:36 Let's call it word problems. Um word problems here means that there's a scenario given to you and you're supposed to do two things. One is that you have to start what's called mathematical um model. In other words, you you turn that scenario into something that math can work. In our case, variable equations, functions, things like that would be what we are interested in. And we I did write a few steps there, but I will just try to make sure that we have named one of these steps
2:26 so that we can we can use it in the examples. The
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Asghar Ghorbanpour.