Noções Básicas sobre Ambiente e Procedimentos no Biotério - parte 2
Overview
Márcia Shimada explains how microenvironment and macroenvironment conditions shape laboratory animal welfare, physiology, staff safety, and research reproducibility, emphasizing that environmental control requires daily measurement and species-aware decisions. She details practical benchmarks and controls, including 85 dB maximum noise, a 12:12 light cycle, temperature and humidity ranges, ventilation rates, ammonia management, suitable bedding and supplies, cage density, and the social costs of isolating or regrouping rodents.
Key takeaways
- A room reading does not guarantee safe cage conditions: the rodent microenvironment can run 1 to 2°C warmer than the macroenvironment, and airflow directed at a cage can intensify heat loss.
- For standard rodent housing, the cited targets are 20 to 26°C room temperature, no more than 4°C variation, 40 to 60% relative humidity, about 325 lux in the room, less than 25 lux inside the cage, and a 12:12 light-dark cycle.
- Ammonia forms when urease-producing bacteria convert urinary urea in bedding into ammonia; sterilizing bedding and controlling density, ventilation, and cage-change intervals help reduce exposure.
- Ventilation depends on coordinated supply and exhaust: the recommended 15 to 25 hourly air changes use 100% fresh air, while IVC cage exhaust should be routed directly to exhaust.
- Bedding is both a hygiene material and a behavioral resource: 2 to 3 cm is a basic minimum, while 5 to 10 cm can better enable digging and tunneling when cage size permits.
- Rodent isolation and unfamiliar regrouping are not neutral handling choices; both can disrupt social structure, and mixing unfamiliar C57BL/6 mice can lead to severe or fatal aggression.
Chapters
- Environmental variables affect animal behavior, physiology, and immune responses, so poor conditions can undermine both welfare and research results.
- Control must support colony health and animal well-being while also protecting technical staff.
- Márcia Shimada frames environmental management as a technical requirement guided by standards, not personal preference.
- The microenvironment, or primary enclosure, is the animal’s immediate space, such as a rodent cage, fish tank, or stable.
- The macroenvironment, or secondary enclosure, is the surrounding space, such as the animal room.
- Temperature, lighting, humidity, air quality, noise, and vibration must be considered at both levels; room measurements alone may not reflect conditions inside a cage.
- Noise and vibration can change behavior, immune function, biochemistry, and reproduction, with effects varying by species, strain, prior exposure, and individual sensitivity.
- Assess sound intensity, frequency, intermittency, and exposure duration; common sources include staff activity, cage movement, autoclaves, cage washers, HVAC, and exhaust systems.
- CONCEA guidance indicates a maximum noise level of 85 dB; a decibel meter can measure levels, and environmental checks should occur at least daily.
- Lighting should be uniform, well distributed, and free of excessive glare to support cage inspection, safe handling, and colony welfare.
- The recommended macroenvironment level is about 325 lux, measured at least 1 m above the floor; rodent microenvironments, especially for albino animals, should preferably remain below 25 lux.
- Programmable digital or analog timers maintain the standard rodent photoperiod of 12 hours light and 12 hours dark; light intensity can affect aggression and cannibalism.
- CONCEA guidance gives a general room temperature range of 20 to 26°C and allows a maximum variation of 4°C, but rats generally prefer cooler conditions than mice.
- Rodents lack functional sweat glands; they dissipate heat through mechanisms such as tail vasodilation and salivation, making them vulnerable to overheating.
- The cage can be 1 to 2°C warmer than the room, so the facility described aims for about 22°C; relative humidity should be 40 to 60%, ideally around 55% ±5.
- Every animal room should have a thermohygrometer showing current, minimum, and maximum readings, with daily checks and resets.
- Air conditioning supplies air while exhaust removes it; both systems must work together to provide oxygen, remove heat, control humidity, and dilute gaseous contaminants.
- Heat comes from animals, staff, lighting, and electrical equipment, so a ventilation failure can raise room and cage temperatures and degrade air quality.
- Do not place cages directly in an air-conditioning discharge; air at 20°C moving at about 18.3 m/s can produce an estimated 7°C cooling effect on an animal.
- The recommended room ventilation rate is 15 to 25 air changes per hour with 100% fresh-air replacement; partial recirculation requires high-efficiency filtration capable of retaining roughly 85 to 95% of particles.
- Individually ventilated cage systems filter and deliver air to each cage, then route exhaust away; airflow speed, direction, and pressure must be controlled.
- Positive pressure supports bioexclusion by preventing contaminants from entering, while negative pressure supports biocontainment by limiting their escape.
- Cage exhaust should connect directly to the exhaust system to reduce room contamination and ammonia accumulation.
- Ammonia can irritate airways, damage mucosa, alter histology and immune function, and confound respiratory or immunological experiments in animals and staff.
- Mammals excrete urea in urine, not ammonia directly; urease-producing bacteria convert the urea into ammonia in bedding and the cage environment.
- CONCEA does not set a single numerical ammonia limit in the guidance discussed; international literature recommends keeping levels below 25 ppm.
- Ammonia concentration depends on bedding, cage-change frequency, animal density, bacterial load, ventilation, and housing system.
- Autoclaving wood-shaving bedding reduces microbial load and urease activity, helping limit ammonia release; the supplied raffia packaging must withstand autoclaving.
- Bedding should be soft, absorbent, non-toxic, odorless, low in dust, sterilized, and free of splinters, resin, pesticides, chemical treatments, and paint.
- Use at least 2 to 3 cm to cover the cage floor; a 5 to 10 cm layer can better support digging and tunnel-building, adjusted for animal size and cage type.
- Too little bedding reduces absorption and can increase ammonia, while too much can restrict movement.
- Commercial diets should be palatable and nutritionally appropriate for species such as mice, rats, hamsters, guinea pigs, and rabbits.
- Rodent incisors grow continuously because their roots remain open, so appropriately hard pellets help wear teeth and prevent overgrowth, malocclusion, pain, and difficulty eating.
- Place feed in the cage’s metal feeder rather than directly on bedding to reduce contamination, waste, and microbial growth.
- Bedding-level or adapted feeding may be justified for debilitated animals, animals after procedures, or those unable to reach the feeder.
- Provide potable, fresh, clean water ad libitum; restriction is appropriate only in exceptional cases justified in an approved experimental protocol.
- Water quality can affect metabolism, immune response, intake, and biochemical results; control methods include autoclaving, acidification, chlorination, reverse osmosis, and ultraviolet treatment.
- The facility’s bottle-filling taps use polypropylene filters for physical particles and activated-carbon filters to reduce chlorine, odors, and some organic contaminants.
- Inspect bottles daily and replace the water completely rather than topping it up, which can encourage bacterial growth and cross-contamination.
- CONCEA minimum-space guidance is a decision framework: larger animals require more space and therefore fewer animals per cage.
- Space planning should account for species, sex, strain, age, body weight, experimental model, diet, and activity, as well as movement and natural behavior.
- Breeding plans must account for litter size, pup age, time to weaning at about 21 days, nursing capacity, and mating systems such as a male with multiple females.
- Crowding young, active rodents can increase stress, aggression, and competition; litter adjustments may be needed to protect welfare and development.
- Rodents are social, group-living animals, so isolation is an intervention that can cause distress and affect behavior, physiology, welfare, and experimental outcomes.
- Isolation should be limited to justified cases such as severe aggression or specific disease, or to an approved experimental protocol, and should be documented.
- Visual, auditory, and olfactory contact with conspecifics can partially reduce isolation stress but does not eliminate it.
- Removing or adding animals can disrupt hierarchy; mixing unfamiliar groups, especially C57BL/6 mice, can trigger serious aggression, injury, or death.
Transcript excerpt
0:00 Olá, pessoal. Bom, então retomando a nossa aula, né? No bloco anterior a gente conversou um pouco sobre a estrutura física da instalação. Nós entendemos como que cada ambiente se organiza e qual que é a lógica sanitária por trás de cada detalhe construtivo. Então agora a pergunta ela vai mudar um pouco, né? O que será que acontece dentro dessa estrutura? Como que esse ambiente ele impacta diretamente eh no bem-estar do animal, na fisiologia desse animal, né? E como que os procedimentos interferem na qualidade da pesquisa que tá sendo desenvolvida? Porque não adianta nós termos uma estrutura física
0:48 perfeita, né? todos aqueles detalhes construtivos que a gente viu no último bloco, se o ambiente interno ele não estiver adequado, tá bom? E é exatamente isso que a gente vai começar a discutir agora. Então, eh, pessoal, o controle das variáveis ambientais dentro de um biotério, ele é absolutamente fundamental. Por quê? Eh, ele acaba sendo essencial para produção e manutenção dos animais. para segurança e a saúde da equipe técnica e principalmente paraa validação dos resultados que são obtidos. O ambiente ideal, ele precisa assegurar tanto o padrão sanitário da colônia quanto promover o bem-estar dos animais.
1:37 Então, essas duas coisas elas precisam caminhar juntas. Quando a gente olha para essa figura que tá no slide, a gente consegue perceber que o ambiente ele é composto por diversos agentes, sejam eles físicos, químicos, biológicos e todos eles influenciam diretamente no comportamento do animal, na fisiologia e na resposta imunológica. Esses fatores, eles têm potencial para alterar o resultado das pesquisas que estão sendo desenvolvidas. Ou seja, quando o ambiente ele não tá adequado, a gente não compromete apenas o bem-estar do animal, mas também a qualidade do resultado que tá sendo obtido. E isso é um ponto central de qualquer instalação.
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Márcia Shimada.