MAT291: Lecture 30 - Superposition of Vector Fields
Overview
Parinaz Naseri explains superposition for vector fields: because divergence and curl are linear, fields from multiple sources add at each observation point. For sources whose symmetry axes or coordinate systems differ, she presents a four-step method: solve each field in its natural coordinates, convert to Cartesian components, express the observation point relative to each source, then add the fields. Three worked examples apply the method to offset cylinders and slabs, then to a sphere and a piecewise field.
Key takeaways
- Superposition follows from the linearity of divergence and curl: the total field at a point is the vector sum of the fields generated by the individual sources.
- For sources with different symmetry axes, convert each field to Cartesian components before adding; cylindrical and spherical unit vectors generally vary with position.
- Evaluate each source field using the observation point minus that source’s symmetry point, so the same global observation point can have different relative coordinates for different sources.
- For an x-axis cylinder, the radial coordinate is sqrt(y^2 + z^2), and its radial and angular unit vectors must be formed in the yz-plane with the stated right-hand-rule orientation.
- Piecewise fields require checking which region contains the source-relative observation point before substituting coordinates, as shown by the cylinder interior/exterior cases and the slab midpoint.
- Shifting each source’s coordinate system and translating the observation point are equivalent approaches; subtracting symmetry-point coordinates provides a direct way to track multiple sources.
Chapters
- For two sources with charge densities rho_1 and rho_2, the total source is rho_1 + rho_2.
- Linearity of divergence lets the total field be represented as F_1 + F_2; linearity of curl extends the principle to fields with circulation as well as divergence.
- The goal is to find the sum of source fields at a shared measurement or observation point.
- When sources share a coordinate system and aligned symmetry axes, add their components directly in that system.
- Offset axes or different geometries, such as a sphere paired with a cylinder, require expressing both fields in a common basis.
- Naseri focuses on converting each field into Cartesian components because xhat, yhat, and zhat are constant across space.
- For a cylinder whose axis is x, the radial direction lies in the yz-plane: rhat = (y yhat + z zhat)/r.
- For an x-axis cylinder, the angular direction follows the right-hand-rule orientation from positive y toward positive z.
- For a y-axis cylinder, the radial direction lies in the xz-plane, and the angular orientation follows the corresponding cyclic axis convention.
- The first example places a cylinder of radius R along the x-axis through (0, 0, B), with theta measured from y toward z.
- Its field is theta_hat/r outside the cylinder and (r/R^2) theta_hat inside it.
- Using theta_hat = (-z yhat + y zhat)/r gives the outside Cartesian field (-z yhat + y zhat)/(y^2 + z^2).
- The second source is a slab with a piecewise y-directed field, so its Cartesian components need no conversion.
- For the origin, subtract the cylinder center (0, 0, B) to get relative coordinates (0, 0, -B).
- The origin is outside the cylinder when B exceeds its radius; substituting the relative point gives F_1 = yhat/B.
- Relative to the slab midpoint (0, 0, -a - d/2), the origin is above the slab, where the piecewise field is yhat.
- Adding the contributions gives F_total = (1 + 1/B) yhat.
- The second example keeps the offset x-axis cylinder and slab geometry but changes the cylinder field to rhat/r outside and (r/R^2) rhat inside.
- For an x-axis cylinder, the outside Cartesian field is (y yhat + z zhat)/(y^2 + z^2).
- At the slab center (0, 0, -a - d/2), the point relative to the cylinder is (0, 0, -a - d/2 - B), producing a field in the negative z direction.
- The slab field is zero at its midpoint because its interior expression is proportional to the relative coordinate z prime.
- The observation point is converted by subtracting each source’s symmetry point, rather than changing the global coordinate system separately for every source.
- For the slab-center example, the slab-relative point is (0, 0, 0), while the cylinder-relative point is (0, 0, -a - d/2 - B).
- Naseri notes that shifting each source’s coordinate system is equivalent, but translating the observation point is a convenient bookkeeping method.
- The third example uses a unit sphere centered at (0, 3, 0), with F_1 = rhat/r^2 outside and F_1 = r rhat inside.
- Since rhat = (x xhat + y yhat + z zhat)/r, the outside field becomes (x xhat + y yhat + z zhat)/(x^2 + y^2 + z^2)^(3/2).
- The second field is yhat for positive y and -yhat for negative y, so its value can be selected directly from each point’s global y-coordinate.
- The observation points are A = (1, 3, 1), B = (0, 3.5, 0), and C = (0, -1, 0).
- Subtracting the sphere center gives relative positions A: (1, 0, 1), B: (0, 0.5, 0), and C: (0, -4, 0).
- A is outside the unit sphere, so its sphere-field contribution is (xhat + zhat)/(2 sqrt(2)); the other field contributes yhat.
- B is inside the sphere, giving a sphere contribution of 0.5 yhat; with the positive-y field, the total is 1.5 yhat.
- C is outside the sphere and its sphere contribution is -yhat/16; add the negative-y contribution from the second field.
Transcript excerpt
0:00 Good morning everyone. Today we are going to talk about superposition of vector fields. Assuming that we mastered how to compute the fields of different geometries with different type of sources, point charges, surface charges or linear charges or any type of sources we might have using the delta direct fun direct function or basically the symmetry stoke theorem or Gaus's law uh any type of things we found let's say the vector fields of different sources as we have but we are working in a space that we don't just have one source but multiple of them right so let's say you have a point
0:51 charge and then also a slab of a charge in different positions compared to each other in this case you can prove that if for example you have two e- rotational fields, one of them produced by row one, the other one produced by row two. If you wanted to calculate the fields, the total fields that exist in this space, you would start with what are my total charges? Your total charges are going to be row one plus row two in this space. That's undeniable, right? You don't need any assumption here. The total charges that exist in
1:40 this suspense are row one and row two. And if you plug in divergence of f_sub_1 instead of row one and divergence of f_sub_2 for row two, then because divergence is a linear operator, we can show that this is exactly equal to divergence of f_sub_1 plus f_sub_2. Which means the total fields in this space are going to be exactly the summation of the fields that row one is making and row two is making. We started with f_sub_1 and f_sub_2 being irrotational, but they don't have to be that. Even if you have a vector
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Parinaz Naseri.