EM fields lecture 33 - displacement field, electrostatics + dielectrics, & computing D from E & P
Overview
Tim Gorringe reformulates electrostatics for dielectrics by distinguishing free and bound charge and defining the auxiliary displacement field as D = ε₀E + P. Its divergence is set by free charge, while the lecture applies the field and interface conditions to a polarized slab and sphere, showing that D can vanish in the slab yet remain nonzero around the sphere even when there is no free charge.
Key takeaways
- Defining D = ε₀E + P makes div D = ρ_free, because the bound-charge contributions in div E and div P cancel.
- The displacement field is auxiliary rather than an independent physical field; E remains the electrostatic field produced by both free and bound charge.
- Knowing div D is not enough to determine D: the zero-free-charge polarized sphere still has nonzero D, whose form also depends on curl conditions and boundary geometry.
- A uniformly polarized slab has E = −P/ε₀ inside, so its polarization and electric-field contributions cancel and D is zero everywhere.
- For a uniformly polarized sphere, D inside is (2/3)P₀ in the polarization direction, while outside it equals ε₀E and has a dipole-shaped field.
- At dielectric interfaces, the normal jump of D is governed by free surface charge, whereas the normal jump of E reflects total charge; electrostatic E also has continuous tangential components.
Chapters
- Tim Gorringe introduces D as a practical auxiliary field for electrostatics involving dielectric materials, not an additional physical field like E.
- The name displacement field dates to Maxwell's ideas about charge displacement in dielectrics, but does not accurately describe the modern field.
- The lecture plans to derive D from E and polarization P, then apply it to a polarized slab, a polarized sphere, and eventually linear isotropic homogeneous dielectrics.
- In the empty-space formulation, charge density is the source of E's divergence, while electrostatic E has zero curl.
- Adding dielectric materials requires distinguishing mobile free charges from bound charges associated with polarization.
- The distinction is useful because free charge can be moved through wires, while bound charge is tied to polarization within a material.
- Polarization P is introduced as a vector field describing electric dipole moment per unit volume in a dielectric.
- The divergence relation div P = −ρ_bound connects polarization to bound volume charge.
- The lecture does not independently specify curl P, leaving part of P's behavior to material geometry and boundary conditions.
- The displacement field is defined as D = ε₀E + P.
- Using div E = (ρ_free + ρ_bound)/ε₀ and div P = −ρ_bound gives div D = ρ_free.
- The resulting E, P, D framework associates E with all charge, P with bound charge, and D with free charge.
- Because electrostatic E has zero curl, the definition D = ε₀E + P implies curl D = curl P.
- The divergence condition alone does not uniquely determine P or D; many fields can share the same divergence.
- The geometry and polarization discontinuities at dielectric surfaces help determine the relevant fields and their circulation.
- The normal component's change across an interface is determined by each field's divergence source: total charge for E, free charge for D, and bound charge for P.
- Electrostatic E has continuous tangential components across an interface because curl E = 0.
- The tangential changes of D and P are equal because curl D = curl P, completing the interface conditions for all three fields.
- The slab is uniformly polarized along the positive z direction, with polarization magnitude P.
- Its top and bottom faces carry bound surface charge densities +P and −P, respectively, while the surrounding vacuum has P = 0.
- The opposing charged faces act like a parallel-plate capacitor, producing an interior electric field E = −P/ε₀ in the negative z direction.
- Inside the slab, ε₀E = −P, so D = ε₀E + P = 0; outside, both E and P are zero, so D is zero there too.
- The result is consistent with the absence of free charge, but the divergence equation alone would not rule out a divergence-free D field.
- At the top interface, E changes by the amount associated with bound surface charge, D has no normal jump because there is no free surface charge, and P drops from P to zero.
- A sphere of radius a has uniform polarization P₀ in the positive z direction and zero polarization outside.
- The sphere has no bound volume charge, but its surface charge varies with cos θ: positive near the north pole, negative near the south pole, and zero at the equator.
- The electric field is −P₀/(3ε₀) in the sphere's interior and has a dipole form outside.
- Inside the polarized sphere, D = ε₀E + P = (2/3)P₀ in the positive z direction.
- Outside the sphere P = 0, so D = ε₀E and follows the external dipole-shaped electric field, proportional to a³/r³.
- Unlike the slab, the sphere has nonzero D despite having no free charge; its divergence is zero, while its field pattern is constrained by curl D = curl P and the surface geometry.
- The next lecture will use D as a shortcut for linear isotropic homogeneous dielectrics, a material class not assumed in these polarized-slab and polarized-sphere examples.
Transcript excerpt
0:01 This class I wanted to introduce what we call the displacement field in electrostatics. It's relevant to electrostatics when you have materials, matter, dialectrics. Uh we often call it an auxiliary field. Uh I think that's to indicate that it's a useful field, a practical field, kind of a utility field. Uh but it's not a physical field, a real field like um an electrical field. It's something that's handy, something that's convenient. Um also the the name displacement in displacement field is um a historical
0:51 name for the displacement field. Uh the displacement field came about uh when um Maxwell was thinking about the displacement of charges in dialectric materials. But the modern version, contemporary version of the displacement field doesn't really um reflect the displacement of the charges in a dialectric. So it's a um historical name, not a very accurate name for for the displacement field. I want to introduce the field in relation to the electrostatic field and in relation to the polarization vector. Um I'll be introducing it by basically reformulating
1:39 uh electrostatics from electrostatics in the absence of materials like dialectrics to electrostatics in the presence of materials dialectrics. And then we'll look at um the displacement field in a couple of examples we've already met. the uh polarized slab of dialectric material and the polarized sphere of dialectric material. These are two examples from last class. U and then we'll follow up with the main use of displacement field which is in materials that are what we call linear isotropic homogeneous dialectrics. So that's a certain class a limited class
2:27 of dialectric materials and that's where the displacement build is very useful very handy. Okay. So let me start with this idea proposal that I'm going to reformulate um electrostatics from a world in which
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, tim gorringe.