EM fields lecture 31 - dielectrics, polarization, and bound surface and volume charge densities
Overview
Tim Gorringe introduces dielectric polarization as the dipole moment per unit volume, explaining how electric fields distort nonpolar atoms such as helium and orient polar molecules such as water. He derives the equivalent bound-charge descriptions: volume charge density \(\rho_b=-\nabla\cdot\mathbf P\) and surface charge density \(\sigma_b=\mathbf P\cdot\hat{\mathbf n}\), connecting microscopic dipoles to the macroscopic electric potential.
Key takeaways
- In a disconnected charged capacitor, inserting a dielectric keeps the free charge on the plates fixed while lowering the voltage; the amount of change depends on the material.
- Nonpolar atoms such as helium acquire induced dipoles when an electric field shifts their electron clouds relative to their nuclei, while polar molecules such as water respond largely by orienting permanent dipoles.
- Polarization \(\mathbf P\) is dipole moment per unit volume, has units of C/m², and gives the dipole moment of a small element through \(d\mathbf p=\mathbf P\,dV\).
- The bound volume charge density is the negative divergence of polarization, \(\rho_b=-\nabla\cdot\mathbf P\); spatially uniform polarization therefore produces no interior bound volume charge.
- The bound surface charge density is the outward-normal component of polarization, \(\sigma_b=\mathbf P\cdot\hat{\mathbf n}\), so a polarized dielectric can carry opposite bound charges on its faces.
- The volume and surface bound-charge formulas follow by expressing the dielectric potential as a sum of dipole potentials, applying a vector product rule, and using Gauss's theorem.
Chapters
- Insulators have low electrical conductivity, so charge does not move freely through them.
- Dielectrics are characterized by their ability to polarize in an electric field and by relative permittivity greater than 1.
- Glass, rubber, plastic, and ceramics are common examples that are both insulators and dielectrics.
- Early electrostatic experiments used condensers and Leyden jars, precursors to modern capacitors.
- For a charged, disconnected parallel-plate capacitor, inserting a dielectric leaves the plate charge fixed while reducing the voltage.
- Faraday compared materials by measuring their effects on capacitance; water produces a large response, while helium gas produces a very small one.
- A nonpolar helium atom has no permanent dipole, but an applied field shifts its electron cloud opposite the field and its positive nucleus along the field.
- The shift creates an induced dipole moment, the basic polarization mechanism for nonpolar atoms and molecules.
- Water molecules have permanent positive and negative ends; an applied field tends to align their dipoles, producing a strong response.
- Without an external field, randomly oriented water dipoles have no preferred direction and their contributions cancel overall.
- The polarization vector \(\mathbf P\) is defined as electric dipole moment per unit volume.
- Since dipole moment has units of coulomb-metres, polarization has units of coulombs per square metre.
- For a small material element, its dipole moment is \(d\mathbf p=\mathbf P\,dV\); the total dipole moment is the volume integral of \(\mathbf P\).
- The element is microscopically large enough to contain many molecules but macroscopically small relative to the material.
- Bound surface charge density is denoted \(\sigma_b\) and measured in coulombs per square metre.
- Bound volume charge density is denoted \(\rho_b\) and measured in coulombs per cubic metre.
- Unlike free charge in conductors, bound charges remain associated with atoms and molecules, although polarization can shift or reorient them.
- Positive and negative free charges on parallel-plate capacitor conductors create the external field that polarizes the inserted dielectric.
- Molecular alignment or atomic distortion produces a thin layer of negative bound charge at one dielectric face and positive bound charge at the other.
- In the uniform-polarization example, the dielectric interior remains neutral because neighboring positive and negative molecular charges cancel.
- This example has bound surface charge but no bound volume charge.
- The derivation represents the polarized material as many small volume elements, each with dipole moment \(d\mathbf p=\mathbf P\,dV\).
- A field point is located by vector \(\mathbf r\), while \(\mathbf r'\) tracks each dipole's position within the material.
- The total electric potential is assembled by integrating the individual dipole potentials over the dielectric.
- Each dipole's potential depends on its moment, its orientation relative to the field point, and the inverse-square distance factor.
- Substituting \(d\mathbf p=\mathbf P(\mathbf r')dV'\) expresses the full potential as a volume integral involving polarization.
- The identity relating the gradient of \(1/R\) to the radial inverse-square factor recasts the integrand in a form suitable for separating volume and surface contributions.
- A vector-calculus product rule rearranges the polarization and gradient terms into a divergence term and a term involving \(\nabla\cdot\mathbf P\).
- Gauss's theorem converts the volume integral of the divergence into an integral over the dielectric's outer surface.
- The resulting expression has separate volume and surface integrals, each with the \(1/R\) dependence of an ordinary charge potential.
- Matching the volume term to a charge-density potential gives \(\rho_b=-\nabla\cdot\mathbf P\).
- Matching the surface term gives \(\sigma_b=\mathbf P\cdot\hat{\mathbf n}\), the component of polarization normal to the surface.
- A uniform polarization can create surface charge without volume charge; volume bound charge appears where polarization varies through the material.
- These equations let the dielectric's electrical effect be described either by its dipoles and polarization or by equivalent bound surface and volume charges.
Transcript excerpt
0:02 Today's class we're moving on to a new topic. We're moving on to electrostatics in the presence of dielectrics. And today's class I want to introduce some terminology. It's polarization and it's bound charges, it's bound surface charges, bound volume charges and we're going to work with those quantities today and over the next next handful of classes. Often we use the word dielectrics and insulators to mean the same thing. But strictly dielectrics and insulators are are different things and they kind of in emphasize different properties of
0:52 material. So in insulators we think of insulators as meaning that they're materials in which electric charge is not free to move through the material. So they're materials in which the electrical conductivity is is low. On the other hand, dielectrics dielectrics are materials that can be polarized by electrical fields. And we think of dielectrics as materials that have a dielectric constant that is greater than zero, have a relative permittivity that is greater than one. So obviously I'm going to have to explain polarization of materials and dielectrics,
1:39 the dielectric constant and what greater than zero means, the relative permittivity and what greater than one means. But that's the distinction between dielectrics and insulators. We we mix them up in everyday language because most die insulators are dielectrics or or most dielectrics are insulators. So things like glass, rubber, plastic, ceramics, they're all insulators, they're all dielectrics. So we jumble up this terminology a bit. The discovery of dielectrics goes back to actually the 1700s, very early in the days of electricity
2:28 and electrostatics when uh scientists were storing charge on what nowadays we would call capacitors, but the what they called them was condensers and Leyden jars. Um and let me just demonstrate how they discovered die dielectrics. So if we imagine a
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, tim gorringe.