Chem1AFA26CSU Chapter 7 Lecture 2
Overview
Dr Nicholas Corsepius extends Lewis-structure methods to ions, resonance, and formal charge, showing how electron counts and charge placement determine valid and comparatively stable structures. Examples include hydroxide and ammonium, nitrate with 18 valence electrons and three resonance forms, carbonate with 24 electrons and three resonance forms, carbon dioxide, and the cyanate ion.
Key takeaways
- For Lewis structures of ions, add one electron for each unit of negative charge and subtract one for each unit of positive charge; OH⁻ and NH₄⁺ each have 8 valence electrons.
- Nitrate, NO₃⁻, has three resonance structures because any one of its three oxygens can form the N=O double bond; its actual structure is a delocalized hybrid.
- Carbonate, CO₃²⁻, has 24 valence electrons and three resonance structures, with the C=O double bond placed at each oxygen in turn.
- Formal charge is calculated as valence electrons minus nonbonding electrons minus half of bonding electrons, and the atom charges must sum to the ion's net charge.
- Among valid Lewis structures, fewer formal charges generally indicate greater stability; CO₂ favors O=C=O, where all atoms have formal charge 0.
- When a formal charge cannot be avoided, a negative charge is favored on the more electronegative atom, as in cyanate with the negative charge on oxygen rather than nitrogen.
Chapters
- Begin with the total number of valence electrons, choose a central atom, connect atoms with single bonds, and distribute remaining electrons.
- Satisfy outer atoms before placing leftover electrons on the central atom.
- If the central atom lacks an octet, convert an outer atom's lone pair into a bonding pair.
- For hydroxide, OH⁻, oxygen contributes 6 electrons, hydrogen 1, and the negative charge adds 1, for a total of 8.
- Draw an O–H single bond, place the remaining 6 electrons on oxygen, and enclose the structure in brackets with a negative charge.
- For ammonium, NH₄⁺, nitrogen contributes 5 electrons and four hydrogens contribute 4; subtract 1 for the positive charge to get 8.
- Connect nitrogen to four hydrogens with single bonds, then bracket the structure and mark its positive charge.
- The nitrate ion, NO₃⁻, has 18 valence electrons: 5 from nitrogen, 18 from three oxygens, and 1 for the negative charge.
- Place nitrogen in the center because it is less electronegative than oxygen, then connect three oxygen atoms with single bonds.
- After assigning the oxygen octets, the initial single-bond structure leaves nitrogen short of an octet.
- Convert a lone pair from one of nitrate's three oxygens into an N=O double bond to give nitrogen an octet.
- Each oxygen can supply that pair, so draw three structures with the double bond in different N–O positions.
- Separate the bracketed structures with resonance arrows; the actual nitrate ion is a hybrid, not a molecule switching among fixed forms.
- Delocalizing the negative charge across the resonance forms stabilizes the nitrate ion.
- Carbonate, CO₃²⁻, has 24 valence electrons and a central carbon connected to three oxygens.
- After making the oxygen atoms' octets, carbon remains short of an octet, so an oxygen lone pair forms a C=O double bond.
- Because any of the three oxygens can form the double bond, represent carbonate with three bracketed resonance structures and resonance arrows.
- Formal charge equals an atom's valence-electron count minus its nonbonding electrons and half of its shared bonding electrons.
- For hydroxide, hydrogen has formal charge 0: 1 valence electron minus 1 electron assigned from the O–H bond.
- Oxygen in OH⁻ has formal charge −1: 6 valence electrons minus 6 lone-pair electrons and 1 assigned bonding electron.
- The sum of all atoms' formal charges must equal the molecule or ion's net charge.
- Start CO₂ with carbon in the center, single bonds to two oxygens, and the remaining valence electrons on the outer atoms.
- Carbon lacks an octet in the initial structure, so form additional bonds by converting oxygen lone pairs.
- Compare an O–C triple bond paired with an O–C single bond against a structure with two C=O double bonds.
- In the single-and-triple-bond CO₂ structure, carbon is neutral, while the oxygens carry formal charges of +1 and −1.
- In the O=C=O structure, both oxygens and carbon have formal charge 0.
- Prefer the double-bonded structure because structures with fewer formal charges are generally more stable.
- When charge is unavoidable, favor a negative formal charge on the more electronegative atom and a positive charge on the less electronegative atom.
- Cyanate, OCN⁻, has 16 valence electrons and can be drawn with the negative formal charge on either oxygen or nitrogen.
- The structure with oxygen carrying −1 and carbon and nitrogen at 0 is preferred over the alternative with nitrogen carrying −1.
- Oxygen is more electronegative than nitrogen, so it better stabilizes the negative formal charge.
- The lecture closes by previewing how Lewis structures will lead to three-dimensional molecular shapes after the break.
Transcript excerpt
0:06 All right, so let's keep going from where we left off last time. All right, last time we were talking about building these le structures. Given these chemical formulas, we could build these le structures and we laid out this set of rules here. We're going to first find the number of veence electrons and we put our central atom in the middle, decorate it with the constituent atoms. All right, connect everything with single bonds. And then we have rules for what we did with our remaining electrons as well. We're going to satisfy the constituents first. Make everybody on the outside happy first. Anything left over goes on the central atom. And then if we still had an incomplete octet, we going to rearrange electrons on the page. Right? So for this example here, we got rid of all of our electrons down on the board here, but still had this incomplete octet. So we rearrange the
0:55 electrons on the page. We move this lone pair down to become a bonding pair. All right. So let's keep going with this. Now we're going to talk about how we do le structures of ions. All right. And so let's just do two examples here. an annion. For our annion, we're going to choose hydroxide O minus and we'll choose a cation. For a cation, we'll choose ammonium. All right, our goal is to build a le
1:49 structure for each of these ions here. And actually the only difference here between what we were doing before is in that very first step where we calculate the total number of veence electrons that we have to work with. Okay. So what we said is for our chemical formula here, we're going to take the we're going to add up in this
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Dr Nicholas Corsepius.