Gen Chem_Ch9_4th_The First Law of Thermodynamics
Overview
Dr. Reza Latifi explains the first law of thermodynamics using the chemistry convention ΔE = q + w: a system’s internal-energy change equals heat transferred to it plus work done on it. He connects this to energy conservation between system and surroundings, clarifies signs with a gas expanding under a piston, and works examples including a net change of −727 kJ.
Key takeaways
- The chemistry form of the first law is ΔE = q + w, with q and w assigned from the system’s perspective.
- Energy conservation requires ΔE_system = −ΔE_surroundings, so the system’s energy loss exactly matches the surroundings’ gain.
- Heat entering a system is positive; heat leaving it is negative.
- Work done by the system on the surroundings, such as gas expansion pushing a piston, is negative for the system.
- A system that releases 622 kJ of heat and performs 105 kJ of work undergoes an internal-energy change of −727 kJ.
- A system’s loss of 115 J corresponds to a surroundings’ gain of 115 J.
Chapters
- Latifi defines the system as the portion being studied and the surroundings as everything outside it; together they make up the universe.
- The universe’s total energy is constant, so ΔE_system + ΔE_surroundings = 0.
- Rearranging gives ΔE_system = −ΔE_surroundings: energy lost by one side is gained by the other.
- For a gas under a piston, heat transferred into the system makes q positive, while the surroundings lose the same heat.
- Heating can raise molecular motion and pressure, causing the gas to expand and push the piston outward.
- When the system does expansion work on the surroundings, w is negative for the system and positive for the surroundings.
- A system releasing 622 kJ of heat and doing 105 kJ of work has ΔE = −622 kJ + (−105 kJ) = −727 kJ.
- When a system gains thermal energy but does work on the surroundings, q is positive and w is negative.
- If the system loses 115 J, then ΔE_system = −115 J and ΔE_surroundings = +115 J.
Transcript excerpt
0:11 [music] >> Hello and welcome back to my favorite people and thank you very much for watching another lecture from General Chemistry. Last lecture I showed you that delta E which is equal to change with the internal energy is going to be equal to Q plus work. And we said if our system is losing heat or doing work on outside the sign for Q or work will be negative. And if our system is accepting heat or outside is doing work on the system, in that case the sign for both of them will be positive. But the question is how do you calculate Q or work? And we want to go toward that that direction. And we start with this law of conservation of energy. Law of conservation of energy is technically the first law of thermodynamics and it comes with from the fact that mass is constant. If mass does not change then
0:58 energy should not change. Why do I care about it? Because remember this the the most common formula for Albert Einstein we say energy is equal to mass multiply square of the square of the light velocity. C does not change and but energy it can go up or down because it's subject to mass. So mass is energy. And if mass is not changing then the energy should not change and that's true. And so your system, whatever you pick, is going to exchange energy with outside and it can gain or lose energy. I want to remind you that the system is the smaller part that you are studying in order to understand amount of energy that it has. And whatever around it it will be the surrounding one. And it can exchange energy as heat or work with outside. And now if I add these two to
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Dr. Reza Latifi at Oklahoma State University, OSU.