Gen Chem_Ch 9_13th_Coffee Cup Calorimeter
Overview
Dr. Reza Latifi explains how a coffee-cup calorimeter measures reaction heat from the temperature change of the surrounding solution, using q = mcΔT and qreaction = -qsolution. In a sodium-water example, 0.0500 mol of sodium raises 100 g of water from 25°C to 46.23°C; the calculated reaction enthalpy is -179.4 kJ/mol.
Key takeaways
- In a coffee-cup calorimeter, the solution's heat is the opposite of the reaction's heat: qreaction = -qsolution.
- At constant pressure, reaction heat equals reaction enthalpy, so qreaction can be reported as ΔH.
- For the sodium-water example, the solution mass is 101.15 g, including 100 g of water and 1.15 g of sodium.
- The solution warms by 21.23°C, absorbing 8.972 kJ while the reaction releases 8.972 kJ.
- To convert the example's reaction heat into molar enthalpy, divide by the limiting reagent amount of 0.0500 mol sodium, yielding -179.4 kJ/mol.
Chapters
- A coffee-cup calorimeter tracks the temperature change after two components are mixed.
- A temperature increase indicates an exothermic reaction, while a decrease indicates an endothermic reaction.
- The measured temperature belongs to the surrounding solution, so qreaction = -qsolution and qsolution = mcΔT.
- At constant pressure, reaction heat qreaction equals the reaction enthalpy ΔH.
- The example reacts sodium with water to form sodium hydroxide and hydrogen gas, which leaves the solution.
- The worked calculation uses 100 g of water, 0.0500 mol of sodium, an initial temperature of 25°C, and a final temperature of 46.23°C.
- Sodium's molar mass, 22.98 g/mol, gives a sodium mass of 1.15 g and a total solution mass of 101.15 g.
- The 21.23°C temperature rise identifies the reaction as exothermic.
- Using qsolution = mcΔT, the example obtains 8,971.8 J, or 8.972 kJ, of heat absorbed by the solution.
- Because qreaction = -qsolution, the reaction releases -8.972 kJ for the amount of sodium used.
- Dividing -8.972 kJ by the limiting reagent amount, 0.0500 mol Na, gives ΔH = -179.4 kJ/mol.
- The negative enthalpy agrees with the observed temperature increase and confirms the exothermic sign.
Transcript excerpt
0:17 Hello and welcome back and thank you very much for watching another lecture from General Chemistry and I hope until this time of the day you had a great time. We're going to talk about how to calculate delta H of a reaction or a process. We have three methods and the first method is going to be the coffee cup calorimeter and you take two or two components, you mix them. When you mix them those two components they might get energy or release energy and we have a thermometer there that is going to read the initial temperature and also the final temperature. Temperature might go up, it will reach a maximum point and slowly it will come down or it might go down and then slowly it will go up. So we will find the maximum or minimum point. If it goes up the reaction is exothermic. If it goes down the reaction is endothermic because it's gaining heat. Now if you know the if you know the mass then you say Q of the reaction equal to minus Q of the calorimeter or the solution and then you will use this formula to calculate Q of the solution.
1:05 If you don't know it, if you don't know the mass you go C multiplied delta T. Question is why do we say Q of the reaction equal to minus Q of the solution or Q of the calorimeter? So from now I'm going to say note you can say Q of the calorimeter is equal to Q of the solution and we say Q of the reaction is equal to minus Q of the solution or Q of the calorimeter and and I said why why do we say minus Q of the calorimeter or the Q of the or the
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Dr. Reza Latifi at Oklahoma State University, OSU.