Gen Chem_Ch 9_19th_Heat and Mass
Overview
Dr. Reza Latifi explains how to connect reaction enthalpy, ΔH, with a reactant or product mass using the balanced iron-oxide reaction, 4Fe + 3O₂ → 2Fe₂O₃, with ΔH = −1652 kJ per reaction as used in the calculations. He demonstrates both directions: converting 3.5 × 10⁴ J of released heat into 4.73 g of iron, and converting 8.75 g of Fe₂O₃ into −45.3 kJ of heat.
Key takeaways
- For 4Fe + 3O₂ → 2Fe₂O₃, the reaction enthalpy of −1652 kJ applies to the reaction as written, not to one mole of every substance.
- An exothermic reaction has negative ΔH, so heat released must be entered as negative Q for a consistent mass calculation.
- To find reactant mass from heat, convert heat to moles using the reaction enthalpy and stoichiometric coefficient, then convert moles to grams with molar mass.
- To find heat from product mass, convert grams to moles and scale ΔH by the product's coefficient; 2 mol Fe₂O₃ correspond to −1652 kJ.
- The worked examples yield 4.73 g Fe from −35 kJ and −45.3 kJ from 8.75 g Fe₂O₃.
Chapters
- The balanced reaction is 4Fe + 3O₂ → 2Fe₂O₃, and the worked calculations use ΔH = −1652 kJ per reaction.
- Because the reaction is exothermic, 3.5 × 10⁴ J of released heat is represented as Q = −35 kJ after converting joules to kilojoules.
- A negative heat value must be paired with negative ΔH; otherwise, the calculation can incorrectly produce a negative mass.
- Use the reaction enthalpy and iron coefficient together: 4 mol Fe correspond to −1652 kJ.
- The conversion chain is −35 kJ → moles of Fe using the reaction ratio → grams of Fe using 55.85 g/mol.
- The calculated iron requirement is 4.73 g, reported to three significant figures.
- Convert 8.75 g Fe₂O₃ to moles using its molar mass, 159.68 g/mol.
- The balanced equation produces 2 mol Fe₂O₃ for ΔH = −1652 kJ, so the enthalpy per mole of Fe₂O₃ is −1652/2 kJ.
- Multiplying the product moles by the coefficient-adjusted enthalpy gives Q = −45.3 kJ, indicating heat release.
Transcript excerpt
0:17 Hello and welcome back. In this lecture, I'm going to show you how to take heat, a given heat and connect it to a chemical reaction in order to find the specific mass for one reagent with a reactant or product or if they give you mass, how do you connect it to delta H and the chemical reaction? And so in first here in first part of the question it says how much iron is needed to release 3.5 multiply 10 4 jewel heat reaction is given. We have one mole from ir reacted with three moles of from O2. We get 2 mo of iron 3 oxide. Delta H of the reaction is -652 kJ per mole. So the reaction clearly is exothermic. I'm going to say this one is exoththermic means delta H is negative. And the thing that I want you to be sensitive to it is the sign N unit of delta H. And so the sign here is negative. Let me highlight the sign is negative.
1:04 And next thing is the unit. It says kilogjle per mole. Well, the Q that they gave you, Q is given and Q is equal to 3.5 0 * 10 4th and this one is the unit for it is jewel. So first step before you do anything match sign of Q with delta H because delta H here is negative and again we said is exothermic Q must be negative. So I'm going to add a negative sign here. Next I will try to make the units same. So I'm going to say let me fix the unit here. 1,000 joule is going to be equal to one kilogjle and that's going to give me that's going to give me the technically the Q in kilogjle. So I
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Dr. Reza Latifi at Oklahoma State University, OSU.