Biossegurança - Parte II
Overview
Bruno Martynhak explains biosafety in animal research through Brazil’s regulatory framework, containment principles, protective equipment, laboratory practices, and occupational risk prevention. He covers CTNBio and CIBio responsibilities under Laws 11,105/2005 and 8,974/1995, then connects standard operating procedures, hand hygiene, and five hazard categories to safer work in animal facilities.
Key takeaways
- Brazil’s GMO oversight distinguishes risk classes: CTNBio authorization is required for classes 2 through 4, while CIBio evaluates class 1 facilities and issues a Certificate of Quality in Biosafety.
- Effective containment requires both primary controls, such as procedures and PPE, and secondary controls, such as facility design and sanitary barriers; risk assessment determines their level.
- Standard operating procedures reduce variation and accidents by documenting exact steps, as in an autoclave protocol specifying material-specific temperature and processing time.
- Rodent sensitivity to noise, perfume, and other odors makes environmental control essential because stress can alter animal physiology and compromise research results.
- Improper sharps disposal creates both injury and biological exposure risks; needles belong in rigid, leak-resistant containers that are closed at the marked fill limit.
- Safe animal-facility work depends on shared responsibility, including avoiding rushed procedures and fatigue and asking for assistance when a task or risk is unclear.
Chapters
- Biosafety combines laboratory good practices with broader concerns such as biodiversity, biotechnology, and bioethics.
- Its central aim is to minimize, prevent, or eliminate risks from research, production, teaching, and technological development.
- Risk controls are intended to protect human health, animal health, and the environment.
- Brazil’s National Technical Commission on Biosafety, CTNBio, was established under Law 11,105 of March 24, 2005.
- CTNBio provides technical advice to the federal government and sets biosafety requirements for genetically modified organisms, including their research, cultivation, transport, sale, release, and disposal.
- Research involving GMOs in risk classes 2 through 4 requires CTNBio authorization; for class 1 work, the institution’s internal biosafety commission, CIBio, evaluates the facility and issues a Certificate of Quality in Biosafety.
- The 1975 Asilomar Conference in California addressed risks from genetic engineering and safety in laboratory spaces.
- Fiocruz helped establish biosafety in Brazil, holding an early biosafety event in 1984 and surveying laboratory risks in 1986 through the National Institute for Health Quality Control.
- Brazil’s first biosafety law, Law 8,974, was enacted in 1995; the National Biosafety Association and its first congress followed in 1999.
- By 2000, biosafety was offered as a required discipline at multiple Brazilian institutions.
- Primary containment protects workers from infectious agents through laboratory procedures, good practices, and individual and collective protective equipment.
- Secondary containment protects the external environment through facility design, sanitary barriers, and operational practices.
- Risk assessment determines the required containment level, and primary and secondary controls must work together rather than operate independently.
- Common personal protective equipment includes gloves, caps, shoe covers, disposable gowns, ear protection, masks, and safety glasses.
- Lab coats should be long-sleeved, reserved for laboratory use, and never worn on public transport or taken home; cotton or suitable synthetic fabric is recommended.
- After work with risk-class 3 or 4 organisms, reusable clothing may require decontamination before laundering.
- Latex, nitrile, and vinyl gloves are options for procedures involving blood or bodily fluids.
- The stated donning sequence is hand hygiene, coat or gown, cap, mask, eye protection, and procedure gloves.
- The removal sequence begins with gloves and proceeds through the cap, coat, eye protection, and mask, followed by hand hygiene.
- Collective protective equipment includes autoclaves for sterilizing supplies such as bedding, cages, and water bottles, as well as emergency showers, biological safety cabinets, and fire extinguishers.
- Emergency equipment such as fire extinguishers should be accessible and clearly marked.
- Good practices are validated, recognized procedures that improve the reliability of work and help identify internal or external factors affecting results.
- A POP, or standard operating procedure, documents each step of a task so different staff members perform it consistently.
- An autoclave POP should specify how to start the machine, choose the temperature for each material, set the processing time, and shut it down.
- Experimental procedures such as anesthesia and cardiac blood collection should also have documented steps and required materials.
- Wash hands when entering or leaving the laboratory and before and after handling animals, chemicals, or other materials; use running water and neutral soap.
- Do not eat, drink, prepare food, or apply cosmetics in animal facilities; rodents are sensitive to odors, which can stress animals and affect research results.
- Keep lab coats inside the laboratory, wear closed shoes, secure long hair, use a cap when required, and keep nails short and clean.
- Avoid touching phones, door handles, or personal items with contaminated gloves, and keep work surfaces organized.
- The five categories are accident, ergonomic, physical, chemical, and biological hazards.
- Accident hazards include incorrect equipment operation and improper disposal of sharps; ergonomic hazards include repetitive movements and poor posture.
- Physical hazards include noise, vibration, pressure, and ionizing radiation; noise can disturb rodents and affect their immune systems and experimental results.
- Chemical exposure can occur through skin contact, inhalation, or ingestion, while biological agents include bacteria, fungi, and parasites classified into four risk groups.
- Receiving animals from a supplier without reliable health monitoring can expose staff and research colonies to biological hazards and zoonoses.
- Transporting many cages alone increases accident risk; carrying about ten mouse cages at once is given as an example of an unsafe load.
- Improper restraint or handling can lead to bites and scratches, while unsuitable room conditions can add ergonomic stress.
- Discarding a contaminated needle in ordinary trash can injure waste handlers and expose them to pathogens such as HIV.
- Prevent accidents through attentive work, moving animals one at a time when changing cages, and following documented procedures.
- Use rigid, leak-resistant sharps containers and close them at the marked fill limit rather than allowing needles to protrude.
- Select PPE to match exposure, including higher-filtration masks when handling agents that can spread through aerosols.
- Avoid rushed work, fatigue, hunger, or sleep deprivation; safety is a collective responsibility, and staff should ask for help whenever uncertain.
Transcript excerpt
0:01 Olá sejam todas e todos muito bem-vindos a mais uma nova edição do curso de manipulação na experimentação animal bem os assuntos que iremos abordar hoje serão boas práticas e saúde ocupacional em biossegurança inicialmente os tópicos que serão abordados serão os conceitos né os principais conceitos em biossegurança a comissão técnica Nacional de biossegurança o que que é nessa comissão técnica Nacional de biossegurança qual a sua finalidade no Brasil o histórico da biossegurança como que a biossegurança surgiu no no mundo
0:49 né e no Brasil os princípios que regem a biossegurança eh os equipamentos de proteção individual os equipamentos de de proteção eh coletivo né as boas práticas em biotérios e saúde ocupacional bem a biossegurança ela é uma área relativamente nova né ela ela uma ela é considerada uma área do conhecimento relativamente nova e bem desafiadora por quê ela vem sendo vista principalmente como uma ciência emergente pois a preocupações né que se estendem desde as boas práticas laboratoriais as questões
1:38 mais abrangentes como a biodiversidade a biotecnologia a bioética também faz parte né do ali do campo de atuação da da biossegurança apontando a necessidade de serem né apontadas medidas preventivas eh medidas de eliminação de prevenção dos riscos tudo tudo isso né destinadas essas medidas destinadas ao conhecimento e controle dos riscos que as pesquisas eh científicas podem aportar ao meio ambiente e a vida então só revisando né o conceito de biossegurança biovida segurança vida então biossegurança Teoricamente eh
2:27 seria eh o conceito né amente seria a segurança da vida a biossegurança ela tem né Por principal finalidade tentar Minimizar prevenir e eliminar todos os riscos inerentes né à produção as atividades de pesquisa de produção de ensino de desenvolvimento tecnológico de prestação de serviços tudo isso visando né a saúde do homem do animal e do meio
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Bruno Martynhak.