Calculus II ep28: Power series (Nov 16, 2026)
Overview
Chris Staecker reviews the ratio and root tests, then introduces power series as infinite polynomials whose convergence depends on the value of x. Worked examples use the ratio test to find convergence intervals, followed by separate endpoint checks with comparison and alternating-series tests, yielding intervals such as [-1, 1) and (-5, 5].
Key takeaways
- For a power series, the ratio test often yields a condition such as |x| < R; the boundary values x = ±R are inconclusive and must be tested in the original series.
- For Σxⁿ/(3n+1), the ratio test gives |x| < 1, while limit comparison at x = 1 and the alternating-series test at x = -1 produce the interval [-1, 1).
- For Σxⁿ/3ⁿ, the ratio test gives |x| < 3, and both boundary series diverge, so the interval is (-3, 3).
- For Σ(-1)ⁿxⁿ/(n·5ⁿ), the ratio test gives |x| < 5; the endpoint x = 5 converges as an alternating harmonic series, while x = -5 diverges harmonically, giving (-5, 5].
- Absolute values are essential in ratio and root tests when x or a base can be negative; the resulting L is nonnegative and should not be interpreted using a signed limit.
Chapters
- For either test, calculate a limit involving absolute values: the ratio test uses |aₙ₊₁/aₙ| and the root test uses ⁿ√|aₙ|.
- An L below 1 gives absolute convergence, while an L above 1 gives divergence; L = 1 is inconclusive and requires another method.
- The root test is often convenient when terms contain nth powers, while the ratio test is a common choice for factorials and related expressions.
- Chris Staecker applies the ratio test to a series involving n², 3ⁿ, and 2ⁿ, forming aₙ₊₁/aₙ.
- Rearranging the ratio isolates the exponential factor 3/2 and a polynomial factor whose limit is 1.
- The resulting L = 3/2 exceeds 1, so the series diverges.
- For a term of the form [1/(3n+1)]ⁿ, the nth root cancels the exponent n.
- The remaining limit is 1/(3n+1), which tends to 0 as n approaches infinity.
- Since L = 0 is below 1, the series converges by the root test.
- Students try three series and choose a test based on the term structure: ratio for the first, either test for the middle, and root for the last.
- The first example's ratio limit is 1/2, so it converges.
- The middle example has root-test limit 5/2 and diverges; the final example's root limit grows to infinity and also diverges.
- In the middle practice problem, taking absolute values turns the negative base in a term involving 5ⁿ/(-2)ⁿ into a positive ratio, giving L = 5/2.
- Staecker emphasizes that an L from a ratio or root test cannot be negative because the test uses absolute values.
- For the final practice problem, rewriting the term as one nth power makes the root test straightforward; the resulting limit is infinity.
- A power series has the form c₀ + c₁x + c₂x² + c₃x³ + …, or compactly Σcₙxⁿ.
- Staecker generally writes power-series sums starting at n = 0, so the first term uses x⁰.
- Substituting a value for x creates an ordinary series, which may converge for some inputs and diverge for others.
- When every coefficient cₙ equals 1, the series becomes 1 + x + x² + x³ + ….
- At x = 0, all terms after the first vanish, so the series sums to 1.
- At x = 1, the series becomes 1 + 1 + 1 + … and diverges.
- The series Σxⁿ is geometric with first term a = 1 and common ratio r = x.
- The geometric-series criterion |r| < 1 gives convergence exactly when |x| < 1.
- The convergence interval is (-1, 1); the geometric test does not include either endpoint.
- For Σxⁿ/(3n+1), the ratio test compares consecutive terms while retaining |x| because x may be negative.
- After cancellation, the n-dependent factor (3n+1)/(3n+4) tends to 1, leaving L = |x|.
- The ratio test guarantees convergence for |x| < 1 and divergence for |x| > 1, but leaves x = ±1 unresolved.
- At x = 1, the power series reduces to Σ1/(3n+1).
- Limit comparison with the harmonic series Σ1/n gives a ratio limit of 1/3, a positive finite number.
- Because the harmonic series diverges, Σ1/(3n+1) also diverges.
- At x = -1, the series becomes Σ(-1)ⁿ/(3n+1), an alternating series.
- Its positive term sequence 1/(3n+1) tends to 0 and decreases, as verified by comparing consecutive terms.
- The alternating-series test proves convergence at x = -1.
- Combining the ratio-test result with both endpoint checks gives convergence for -1 ≤ x < 1.
- The series diverges at x = 1 but converges at x = -1, so the interval is [-1, 1).
- Staecker highlights endpoint testing as a necessary step whenever the ratio test produces L = 1.
- For Σxⁿ/3ⁿ, the ratio test simplifies to L = |x|/3.
- The inequality L < 1 gives |x| < 3, or the open interval (-3, 3), while |x| > 3 gives divergence.
- At x = 3 the series becomes Σ1, and at x = -3 it becomes Σ(-1)ⁿ; both diverge.
- The class tests Σ(-1)ⁿxⁿ/(n·5ⁿ) and is asked to report its convergence interval.
- Applying the ratio test leaves L = |x|/5 because the n/(n+1) factor tends to 1.
- The interior convergence condition is |x| < 5, so the endpoints x = 5 and x = -5 must be checked separately.
- At x = 5, cancellation reduces the series to the alternating harmonic series Σ(-1)ⁿ/n, which converges.
- At x = -5, the sign factors multiply to 1, leaving the divergent harmonic series Σ1/n.
- The final convergence interval includes 5 but excludes -5: (-5, 5].
Transcript excerpt
0:00 So we are talking about the ratio and the root test. I gave a little introduction last time. I got some for you to try. Let's just recap a little. Um and then we'll go on to the next section here. The ratio and the root test. [snorts] Um the idea for both of them. So for the ratio you look at L equals the limb of absolute value a n + 1 / a n. [cough] Both of these of course are about if if you have a series the sum of a n does it converge or not. In the ratio test you look at this limit of ratios. In the root test you look at this rather strange limit of the nth roots. And
0:51 these always have absolute values in them which [snorts] is actually a good thing usually. All right. Uh anyway in either case you uh the the results of the test are as follows. If L is less than one then the series converges. In fact, if L is less than one, then it converges absolutely, which means, you know, it converges and also the sum absolute value A converges. Usually, we don't really care about this part, but it is it's true. Um, [clears throat] so if the L is less than one, then it converges. If the L is greater than one or the L does not exist, like those are
1:38 limits. So it's possible they're infinity or they for other reasons just do not exist. Uh then the series diverges and if L equals 1 then this is inconclusive. You just don't know if it uh inconclusive. You just don't know if it converges or not and you have to do it some other way. All right. That's the bad news
This is the start of the transcript. Save this video free for the whole transcript, searchable and time-coded.
In this course
Related notes
Summary, takeaways, and chapters were generated by AI from the video's transcript and may contain errors. The video belongs to its creator, Prof Staecker.